Smeg LB30AFNF - Инструкция по эксплуатации - Страница 14
31
12. Place the paper jig
⑦
on the reference line of the paper jig at the rear side of the
furniture door. (See Figure 7)
※
※
Reference
- Place the reference line of the paper jig at 1595mm from the floor of the furniture.
- If the furniture door is long, place the reference line of the paper jig at 1595mm plus
‘A’ from the floor of the furniture.
Before fixing with the wood screw
ⓑ
,
make sure that the marked point is correct.
13. Mark two holes of the paper jig
⑦
at the
furniture door. (See Figure 8)
7
A
1595mm
(Figure 7)
Reference line
of paper jig (for
the right hinge)
Reference line
of paper jig (for
the left hinge)
(Figure 8)
⑦
14. After removing the paper jig
⑦
, place the
top bracket
⑧
of the furniture door on the
furniture plate and then fix the top bracket
⑧
of the furniture door with the wood screws
ⓑ
(four spots). (See Figure 9)
※
※
Reference
- When fixing because the location
of the top bracket is not correct,
use the unused hole to fix.
(Figure 9)
b
b
8
6. Procedure to install
3) Furniture door related work
"Загрузка инструкции" означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
