Digma DiVision 300 - Инструкция по эксплуатации - Страница 7

7

4. GETTING STARTED

An initial setup must be performed in order to manage the device via the mobile app. To do this:

1.   Connect your mobile device to a 2.4 GHz standard wireless network.
2.   Download the DIGMA SmartLife app from the app store on your mobile device.
3.   Launch the DIGMA SmartLife app. Register your account by following the tips on the screen (for 

new users), or log in using your existing credentials.
4.   Go to the My Devices section. Click the + icon in the upper right corner to add a new device and 

select the device type to be connected (Smart camera).
5.   Put the device in the configuration mode by pressing and holding the on/off button (you will 

hear a confirmation sound, and then the voice messages “Reset to factory settings” and “Network 

connection required”).
6.   Follow the setup instructions on the mobile device screen:
•    Make sure your mobile device is connected to a WiFi network and enter the access password
•    Click the Confirm button and wait until the application detects a configurable device. Wait for the 

progress indicator to reach 100%.
•   After successful configuration you will hear the voice message “The network connection has been 

established”.
•   Assign a suitable name to the camera and complete the setup by pressing the Done button.