2E (ACF120PA) - Инструкция по эксплуатации - Страница 4

4

7.

К RGB коннектору (3 пин) (коннектор с колпачком) возможно дополнительно 
подключить другое RGB устройство.         

Внимание! 

Очень важно придерживаться полярности при подключении 

коннектора вентилятора. Некорректное подключение может стать причиной 
короткого замыкания, со вспышкой и последующим возгоранием. Произ-
водитель не несет ответственность и не компенсирует повреждения, что 
возникли в следствии неправильного подключения устройства.

Fan installation:

1.

Carefully check the design of the case and specification for it. Pay attention to the 
special places for the 120mm fans.

2.

Place the fan in the place provided for its mounting and fix it with mounting 
screws on the four sides.

3.

Make sure that the fan does not interfere with other components of the computer 
system and that foreign objects do not enter the blades during operation.

4.

Connecting the fan: to the motherboard - connector 2510-4PIN..

5.

The fan does not light up by itself. In order to enable ARGB lighting, it is 
important that the motherboard supports this function and has a + 5V RGB AURA 
connector (3 pin). RGB lighting control system not included.        

6.

To connect the fan, you can use a controller or a motherboard that supports RGB 
backlighting: connector 1 (3 pin) can be connected to the corresponding socket 
on the motherboard. In this case, it is necessary to observe the polarity. More 
detailed information on connection can be found in the users manual for the 
motherboard.

7.

It is possible to additionally connect RGB device to another RGB connector (3 pin) 
(connector with cap). 

Attention! 

It is very important to adhere to the polarity when connecting the fan 

connector. Incorrect connection may cause a short circuit, causing a flash and 
subsequent fire. The manufacturer is not responsible and does not compensate 
for damage that has arisen as a result of improper connection of the device.