Yamaha YPT-340 - Инструкция по эксплуатации - Страница 2

2

PSR-E343/YPT-340  Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter). 
DO NOT connect this product to any power supply or adapter other 
than one described in the manual, on the name plate, or specifically 
recommended by Yamaha.

WARNING: 

Do not place this product in a position where anyone could 

walk on, trip over, or roll anything over power or connecting cords of any 
kind. The use of an extension cord is not recommended! If you must use an 
extension cord, the minimum wire size for a 25’ cord (or less ) is 18 AWG. 
NOTE: The smaller the AWG number, the larger the current handling 
capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied or; a 
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is 
used, please observe all safety markings and instructions that accom-
pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE: 

The information contained in this manual is believed to be correct at 
the time of printing. However, Yamaha reserves the right to change or 
modify any of the specifications without notice or obligation to update 
existing units.
This product, either alone or in combination with an amplifier and 
headphones or speaker/s, may be capable of producing sound levels 
that could cause permanent hearing loss. DO NOT operate for long 
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you 
should consult an audiologist. 
IMPORTANT: The louder the sound, the shorter the time period before 
damage occurs.
Some Yamaha products may have benches  and / or accessory 
mounting fixtures that are either supplied with the product or as 
optional  accessories. Some of these items are designed to be dealer 
assembled or installed. Please make sure that benches are stable and 
any optional fixtures (where applicable) are well secured BEFORE 
using.
Benches supplied by Yamaha are designed for seating only. No other 
uses are recommended.

NOTICE: 

Service charges incurred due to a lack of knowledge relating to how a 
function or effect works (when the unit is operating as designed) are 
not covered by the manufacturer’s warranty, and are therefore the 
owners responsibility. Please study this manual carefully and consult 
your dealer before requesting service.

ENVIRONMENTAL ISSUES: 

Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the 
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be 
aware of the following:

Battery Notice: 
This product MAY contain a small non-rechargeable battery which (if 
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes neces-
sary, contact a qualified service representative to perform the 
replacement.
This product may also use “household” type batteries. Some of these 
may be rechargeable. Make sure that the battery being charged is a 
rechargeable type and that the charger is intended for the battery being 
charged.
When installing batteries, never mix old batteries with new ones, and 
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating and 
battery case rupture.
Warning: 
Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as 
regulated by the laws in your area. Note: Check with any retailer of 
household type batteries in your area for battery disposal information.
Disposal Notice: 
Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all 
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable 
to assist you, please contact Yamaha directly.

NAME PLATE LOCATION: 

The name plate is located on the bottom of the product. The model 
number, serial number, power requirements, etc., are located on this 
plate. You should record the model number, serial number, and the 
date of purchase in the spaces provided below and retain this manual 
as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP 

(bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-
tained in this manual, meets FCC requirements. Modifications not 
expressly approved by Yamaha may void your authority, granted by 
the FCC, to use the product.

2. IMPORTANT:

 When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s 
supplied with this product MUST be used. Follow all installation 
instructions. Failure to follow instructions could void your FCC 
authorization to use this product in the USA.

3. NOTE:

 This product has been tested and found to comply with the 

requirements listed in FCC Regulations, Part 15 for Class “B” digital 
devices. Compliance with these requirements provides a reason-
able level of assurance that your use of this product in a residential 
environment will not result in harmful interference with other elec-
tronic devices. This equipment generates/uses radio frequencies 
and, if not installed and used according to the instructions found in 
the users manual, may cause interference harmful to the operation 
of other electronic devices. Compliance with FCC regulations does 

not guarantee that interference will not occur in all installations. If 
this product is found to be the source of interference, which can be 
determined by turning the unit “OFF” and “ON”, please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by 
the interference. 
Utilize power outlets that are on different branch (circuit breaker or 
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the 
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the 
lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results, 
please contact the local retailer authorized to distribute this type of 
product. If you can not locate the appropriate retailer, please con-
tact Yamaha Corporation of America, Electronic Service Division, 
6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed by 
Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.

(class B)

FCC INFORMATION (U.S.A.)