STOMER SMD-850 98299618 - Инструкция по эксплуатации - Страница 8

7

●

  Do not work materials containing asbestos. Asbes-

tos is considered carcinogenic.

●

  Take protective measures when dust can develop 

during working that is harmful to one’s health, com-
bustible or explosive. Example: Some dusts are re-
garded as carcinogenic. Wear a dust mask and work 
with dust/chip extraction when connectable.

OPERATING INSTRUCTIONS

The choice of stirrer paddle depends on the material 
to be stirred. For materials with low viscosity, e. g., dis-
persion paint, varnish, adhesions, casting compound, 
cement grout, etc., use a stirrer paddle with left-hand 
spiral.
For materials with high viscosity, e. g., ready-mixed 
plaster, concrete, cement, screed, 

fi

 ller, epoxy resin, 

etc., use a stirrer paddle with right-hand spiral. While 
mixing, move the power tool in an up and down motion. 
Clean the stirror paddle after use.

MAINTENANCE

Make sure that the machine is not live when 
carrying out maintenance work on the motor. 

Regularly clean the machine housing with a soft cloth, 
preferably after each use. Keep the ventilation slots 
free from dust and dirt.If the dirt does not come off use 
a soft cloth moistened with soapy water. Never use 
solvents such as petrol, alcohol, ammonia water, etc. 
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please 
contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during 
transport, it is delivered in a sturdy packaging. Most of 
the packaging materials can be recycled. Take these 
materials to the appropriate recycling locations. Take 
your unwanted machines to your local SBM Group 
dealer. Here they will be disposed of in an environmen-
tally safe way.

b) Do not use the power tool if the switch does not turn 
it on and off. Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired.

c) Disconnect the plug from the power source and/or 
the battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. Such preventive safety measures reduce the risk 
of starting the power tool accidentally.

d) Store idle power tools out of the reach of children 
and do not allow persons unfamiliar with the power tool 
or these instructions to operate the power tool. Power 
tools are dangerous in the hands of untrained users.

e) Maintain power tools. Check for misalignment  or 
binding of moving parts, breakage of parts and any 
other condition that may affect the power tool’s opera-
tion. If damaged, have the power tool repaired before 
use. Many accidents are caused by poorly maintained 
power tools.

f) Keep cutting tools sharp and clean. Properly main-
tained cutting tools with sharp cutting edges are less 
likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in 
accordance with these instructions, taking into account 
the working conditions and the work to be performed. 
Use of the power tool for operations different from 
those intended could result in a hazardous situation.

5) Service

a) Have your power tool serviced by a quali

fi

 ed  repair 

person using only identical replacement parts. This will 
ensure that the safety of the power tool is maintained.

MACHINE-SPECIFIC SAFETY WARNINGS

●

  Do not use the power tool for explosive materials 

(e. g., easily in

fl

 ammable solvents). Power tools pro-

duce sparks which could ignite developing vapours.

●

  In case the power tool should fall into the material 

to be stirred, pull the plug immediately and have the 
power tool checked by an after-sales service agent. 
Material that has penetrated the power tool can 
cause damage and lead to an electric shock.

●

  Always use the auxiliary handle supplied with the 

machine. Loss of control can cause personal injury.

●

  When working with the machine, always hold it 

fi

 rm-

ly with both hands and provide for a secure stance. 
The power tool is guided more secure with both 
hands.