STOMER SCD-750 98298093 - Инструкция по эксплуатации - Страница 8

7

GB

TECHNICAL SPECIFICATIONS   

 1 

PRODUCT ELEMENTS  

 2 

Product Features

The numbering of the product features refers to the il-
lustration of the machine on the graphics page.

1 Screwdriver 

bit*

2 Stop 

bushing

3  Adjustment sleeve for screwing-depth stop
4 Screwing-depth 

stop

5  Wheel for maximum speed control
6  Lock-on button for On/Off switch
7 On/Off 

switch

8  Rotational direction switch
9  Universal bit holder

*The accessories illustrated or described are not in-
cluded as standard delivery.

GENERAL POWER TOOL SAFETY

Warnings: Read all safety warnings and all 
instructions. Failure to follow the warnings 
and instructions may result in electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future refer-
ence.
The term “power tool” in the warnings refers to your 
mains-operated (corded) power tool or battery- oper-
ated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark 
areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of 

fl

 ammable  liquids, 

gases or dust. Power tools create sparks which may 
ignite the dust or fumes.
c) Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose 
control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never mod-
ify the plug in any way. Do not use any adapter plugs 
with earthed (grounded) power tools. Unmodi

fi

 ed plugs 

and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfac-
es, such as pipes, radiators, ranges and refrigerators. 
There is an increased risk of electric shock if your body 
is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. 
Water entering a power tool will increase the risk of 
electric shock.

d) Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep cord 
away from heat, oil, sharp edges and moving parts. 
Damaged or entangled cords increase the risk of elec-
tric shock.
e) When operating a power tool outdoors, use an ex-
tension cord suitable for outdoor use. Use of a cord 
suitable for outdoor use reduces the risk of electric 
shock.
f) If operating a power tool in a damp location is una-
voidable, use a residual current device (RCD) protect-
ed supply. Use of an RCD reduces the risk of electric 
shock.

3) Personal safety

a) Stay alert, watch what you are doing and use com-
mon sense when operating a power tool. Do not use 
a power tool while you are tired or under the in

fl

 uence 

of drugs, alcohol or medication. A moment of inatten-
tion while operating power tools may result in serious 
personal injury.
b) Use personal protective equipment. Always wear eye 
protection. Protective equipment such as dust mask, 
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal 
injuries.
c) Prevent unintentional starting. Ensure the switch is 
in the off-position before connecting to power source 
and/or battery pack, picking up or carrying the tool. 
Carrying power tools with your 

fi

 nger on the switch or 

energising power tools that have the switch on invites 
accidents.
d) Remove any adjusting key or wrench before turning 
the power tool on. A wrench or a key left attached to a 
rotating part of the power tool may result in personal 
injury.
e) Do not overreach. Keep proper footing and balance 
at all times. This enables better control of the power 
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jew-
ellery. Keep your hair, clothing and gloves away from 
moving parts. Loose clothes, jewellery or long hair can 
be caught in moving parts.
g) If devices are provided for the connection of dust 
extraction and collection facilities, ensure these are 
connected and properly used. Use of dust collection 
can reduce dust-related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the correct power 
tool for your application. The correct power tool will do 
the job better and safer at the rate for which it was de-
signed.
b) Do not use the power tool if the switch does not turn 
it on and off. Any power tool that cannot be controlled 
with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or 
the battery pack from the power tool before making any 
adjustments, changing accessories, or storing power 
tools. Such preventive safety measures reduce the risk 
of starting the power tool accidentally.