Шуруповерты STATUS SD-300/2 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
3
1.
INTENDED USE
2
.
SAFETY ADVICE
INTENDED USE
SAFETY ADVICE
This electric drill is intended for the drilling of wood, ceramic, plastic, and metal
working, as well as tightening and loosening
screws.
Only adults may use this tool.
Any other usage is inappropriate. Tampering with, or using parts which were not
reviewed orapproved by the manufacturer, is also
inappropriate. Inappropriate
use may cause unpredictable damage to the user and surrounding objects.
The manufacturer
assumes no responsibility for damages resulting from
inappropriate usage.
WARNING!
Read all instructions carefully. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
The term "power tool" in all the warnings listed below refers to your mains
operated (corded) power tool or battery operated
(cordless) power tool.
SAVE THESE INSTRUCTIONS
1)
WORK AREA
•
Keep work area clean and well lit.
Cluttered and dark areas incite accidents.
•
Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes.
•
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2)
ELECTRICAL SAFETY
•
Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
•
Avoid body contact with earthed or grounded surfaces such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if your
body is earthed or grounded.
•
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
•
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging
the power tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric shock.
•
When operating a power tool outdoors, use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric
shock
.
•
Connect the electric power tool to electricity, using a 16/25 A maximum secure
contact protected outlet (230/120V~, 50/60
Hz). We recommend you to attach
a residual current circuit-breaker (RCD) that does not exceed 30mA.
4
2
.
SAFETY ADVICE
3)
PERSONAL SAFETY
•
Stay alert, watch what you are doing and use common sense when operating
a power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication.
A moment of inattention while operating power
tools may result in serious
personal injury.
•
Use safety equipment. Always wear eye protection.
S
afety equipment such as
dust mask, non-skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
•
Avoid accidental starting. Ensure the switch is in the off position before
plugging in.
Carrying power tools with your finger on the switch or plugging in
power tools that have the switch on invites accidents.
•
Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
•
Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
•
Dress properly. Do not wear loose clothing or jewellery. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long
hair can be caught in moving parts.
•
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and
p
roperly used.
Use of these devices
can reduce dust related hazards.
4)
POWER TOOL USE AND CARE
•
Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it
was designed.
•
Do not use the power tool if the switch does not turn it on and off.
Any power
tool that cannot be controlled with the switch is dangerous and must be
repaired.
•
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures
reduce the risk of starting the power tool accidentally.
•
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
•
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use.
Many
accidents are caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
Характеристики
Остались вопросы?Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)
