Sparky BR2 12Li-C HD - Инструкция по эксплуатации - Страница 6

4

BR2 12Li-C HD • BUR2 12Li-C HD

EN

General power tool  

safety warnings

WARNING!

Read all safety warnings and 

all instructions. 

Failure to follow the warnings and 

instructions  may  result  in  electric  shock,  fire  and/or 

serious injury. 

Save all warnings and instructions for future 

reference.

The term “power tool” in the warnings refers to your 

mains-operated (corded) power tool or battery-operated 

(cordless) power tool.

1. WORK AREA SAFETY

a) Keep work area clean and well lit. 

Cluttered or 

dark areas invite accidents.

b)  Do not operate power tools in explosive atmos-

pheres, such as in the presence of flammable 

liquids, gases or dust. 

Power tools create sparks 

which may ignite the dust or fumes.

c) Keep children and bystanders away while op-

erating a power tool. 

Distractions can cause you 

to lose control.

2. ELECTRICAL SAFETY

a) Power tool plugs must match the outlet. Never 

modify the plug in any way. Do not use any adapter 

plugs with earthed (grounded) power tools. 

Un-

modified plugs and matching outlets will reduce risk of 

electric shock.

b) Avoid body contact with earthed or grounded 

surfaces, such as pipes, radiators, ranges and 

refrigerators. 

There is an increased risk of electric 

shock if your body is earthed or grounded.

c)  Do not expose power tools to rain or wet condi-

tions. 

Water entering a power tool will increase the 

risk of electric shock.

d) Do not abuse the cord. Never use the cord for 

carrying, pulling or unplugging the power tool. 

Keep cord away from heat, oil, sharp edges or 

moving parts. 

Damaged or entangled cords in-

crease the risk of electric shock.

e)  When operating a power tool outdoors, use an 

extension cord suitable for outdoor use. 

Use of 

a cord suitable for outdoor use reduces the risk of 

electric shock.

f)  If operating a power tool in a damp location 

is unavoidable, use a residual current device 

(RCD) protected supply. 

Use of an RCD reduces 

the risk of electric shock.

3. PERSONAL SAFETY

a) Stay alert, watch what you are doing and use 

common sense when operating a power tool. 

Do not use a power tool while you are tired or 

under the influence of drugs, alcohol or medi-

cation. 

A moment of inattention while operating 

power tools may result in serious personal injury.

b) Use personal protective equipment. Always 

wear eye protection. 

Protective equipment such as 

dust mask, non-skid safety shoes, hard hat, or hear-

ing protection used for appropriate conditions will 

reduce personal injuries.

c) Prevent unintentional starting. Ensure the 

switch is in the off-position before connecting 

to power source and/or battery pack, picking 

up or carrying the tool. 

Carrying power tools with 

your finger on the switch or energising power tools 

that have the switch on invites accidents.

d) Remove any adjusting key or wrench before 

turning the power tool on. 

A wrench or a key left 

attached to a rotating part of the power tool may 

result in personal injury.

e)  Do not overreach. Keep proper footing and bal-

ance at all times. 

This enables better control of 

the power tool in unexpected situations.

f)  Dress properly. Do not wear loose clothing or 

jewellery. Keep your hair, clothing and gloves 

away from moving parts. 

Loose clothes, jewel-

lery or long hair can be caught in moving parts.

g) If devices are provided for the connection of 

dust extraction and collection facilities, en-

sure these are connected and properly used. 

Use of dust collection can reduce dust-related haz-

ards.

4. POWER TOOL USE AND CARE

a) Do not force the power tool. Use the correct 

power tool for your application. 

The correct 

power tool will do the job better and safer at the 

Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful. Contact 

with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders.

Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives 

for wood conditioning (chromate, wood preservative). Material containing asbestos must only be treated by specialists.

▪

Where the use of a dust extraction device is possible it shall be used.

▪

To achieve a high level of dust collection, use vacuum cleaner for wood or for wood and/or minerals together with 

this tool.

▪

The work place must be well ventilated.

▪

The use of a dust mask of filter class P2 is recommended.

Follow national requirements for the materials you want to work with.

pages B[U]R2_12Li-C_HD-133137V1.indd   4

7.2.2018 г.   8:47:33