Ryobi R4SDP-L13C - Инструкция по эксплуатации - Страница 4

2

| English

service or repair is required. Incorrect 
reassembly may result in a risk of 
electric shock or fire.

■

Unplug charger from outlet before 
attempting any maintenance or 
cleaning to reduce the risk of electric 
shock.

■

Disconnect charger from the power 
supply when not in use. This will 
reduce the risk of electric shock or 
damage to the charger if metal items 
should fall into the opening. It also will 
help prevent damage to the charger 
during a power surge.

■

Risk of electric shock. Do not 
touch uninsulated portion of output 
connector or uninsulated battery 
terminal.

BATTERY SAFETY WARNINGS

Li-ion

■

Do not dispose of used battery packs 
in the household refuse or by burning 
them. To ensure proper disposal of 
waste battery packs and protect the 
environment, hand over old battery 
packs to your Ryobi distributor.

■

Segregate electronic waste properly 
by removing integrated battery packs 
from the main unit before disposal. 
Hand them over to applicable 
collection points.

■

To remove the integrated battery 
pack: Separate the housing shells 
from one another by removing the 
screws. Disconnect the battery pack 
from the circuit and remove.

■

NOTE:

 When opened, the product is 

no longer reusable or serviceable and 

should be disposed of properly.

■

Before removing the battery pack 
from the power tool, switch on the 
product until the battery pack is fully 
discharged.

■

Ensure that the battery pack to be 
disposed of cannot come in contact 
with batteries, other battery packs, 
or conductive materials by protecting 
exposed connectors with insulating, 
non-conductive caps or tape.

■

Never charge a damaged battery 
pack.

RESIDUAL RISKS

Even when the product is used as 
prescribed, it is still impossible to 
completely eliminate certain residual risk 
factors. The following hazards may arise 
and the operator should pay special 
attention to avoid the following:

■

Damage to hearing caused by noise
Wear suitable hearing protection and 
limit exposure.

■

Injury to the eyes
Wear protective eye shields or goggles 
when using the product.

■

Injury caused by vibration
Limit exposure. Follow the instructions 
in Risk Reduction.

■

Electric shock caused by contact with 
hidden wires
Hold the product only by insulated 
services.

■

Injury caused by dust
Dust created by operating the product 
can cause respiratory injury. Wear 
appropriate dust control mask with 
filters suitable for protecting against 
particles from the material being 
worked on.