Ryobi ONE+ R18DD2-0 5133003816 - Инструкция по эксплуатации - Страница 3

1

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

Safety, performance, and dependability have been given 
top priority in the design of your drill driver.

INTENDED USE

The drill driver is intended to be used only by adults who 
have read and understood the instructions and warnings 
in this manual, and can be considered responsible for their 
actions.

The product can be used for drilling into various materials, 
including wood, metal, and plastics using a drill bit having a 
shank diameter of less than 10 mm. 

The product can be used to drive and remove screws and 
bolts using an appropriate bit.

Do not use the product in any way other than those stated 
for intended use.

 WARNING

Read all safety warnings, instructions, illustrations 
and specifications provided with this power tool.

Failure to follow all instructions listed below may result in 
electric shock, 

fi

 re and/or serious injury.

Save all warnings and instruction for future reference.

DRILL DRIVER SAFETY WARNINGS

■

Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

■

Hold power tool by insulated gripping surfaces, 
when performing an operation where the cutting 
accessory may contact hidden wiring.

 Cutting 

accessory contacting a “live” wire may make exposed 
metal parts of the power tool “live” and could give the 
operator an electric shock.

■

Hold power tool by insulated gripping surfaces, 
when performing an operation where the fastener 
may contact hidden wiring.

 Fasteners contacting a 

“live” wire may make exposed metal parts of the power 
tool “live” and could give the operator an electric shock.

■

Wear ear protectors when drilling.

 Exposure to noise 

can cause hearing loss.

■

When not in use, all tools should be disconnected from 
power source.

■

The dust produced when using the product may pose a 
health hazard. Do not inhale the dust. Wear a suitable 
dust protection mask..

■

Do not operate on materials (e.g., asbestos) that 
present a health hazard.

■

Switch off the product immediately if the bit stalls. Do 
not switch on the product again while the bit is stalled, 
as doing so could trigger a sudden recoil with a high 
reactive force. Determine why the bit stalled and rectify 
this, paying heed to the safety instructions.

The possible causes may be:

–

it is tilted in the workpiece

–

it has pierced the workpiece

–

the product is overloaded

■

Sawdust and splinters must not be removed while the 
product is running.

■

When working in walls, ceilings, or floors, avoid hitting 
electrical cables and gas or water pipes.

■

Secure your workpiece with a clamping device.

■

Ambient temperature range for tool during operation is 
between 0 

˚

C and 40

˚

 C.

■

Ambient temperature range for tool storage is between 
0 

˚

C and 40

˚

 C.

■

The recommended ambient temperature range for the 
charging system during charging is between 10 

˚

C and 

38

˚

 C.

ADDITIONAL BATTERY SAFETY WARNINGS

 WARNING

To reduce the risk of 

fi

 re, personal injury, and product 

damage due to a short circuit, never immerse your 
tool, battery pack or charger in 

fl

 uid or allow a 

fl

 uid  to 

fl

 ow inside them. Corrosive or conductive 

fl

 uids,  such 

as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

■

Ambient temperature range for battery during use is 
between 0 

˚

C and 40

˚

 C.

■

Ambient temperature range for battery storage is 
between 0 

˚

C and 20

˚

 C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.

Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps 
or tape. Do not transport batteries that are cracked or 
leaking. Check with the forwarding company for further 
advice.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 
factors. The following hazards may arise, and the operator 
should pay special attention to avoid the following:

■

Risk of electrocution if electric cables are drilled into.  
Always grasp the product by designated handles; do