Metabo SBE 850 600842500 - Инструкция по эксплуатации - Страница 13

ENGLISH

en

13

Original instructions

We declare under our sole responsibility: These 
impact drills, identified by type and serial number 
*1), comply with all relevant requirements of the 
directives *2) and standards *3). Technical file at *4) 
-  

Fig. P

The machine is suitable for drilling, without impact, 
in metal, wood, plastic and similar materials and for 
impact drilling in concrete, stone and similar mate-
rials. It is also suitable for thread tapping and for 
screwdriving (not SB 710).
The user bears sole responsibility for any damage 
caused by improper use.
Generally accepted accident prevention regula-
tions and the enclosed safety information must be 
observed.

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 
fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your power tool only together with these 
documents.

For your own protection and for the 
protection of your power tool, pay atten-
tion to all parts of the text that are marked 
with this symbol!

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss.

Use the additional handle supplied with the 

tool.

 Loss of control can cause personal injury.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a "live" wire may make exposed metal 
parts of the electrical tool "live" and could give the 
operator an electric shock.
Pull the plug out of the plug socket before any 
adjustments or servicing are performed.
Avoid inadvertent starts by always unlocking the 
switch when the plug is removed from the mains 
socket or in case of a power cut.

Ensure that the spot where you wish to work is free 
of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).
Smaller workpieces must be secured such that they 
are not carried along with the drill bit when drilling 
(e.g. by clamping in a vice or on a work bench with 
screw clamps).
Keep hands away from the rotating tool! Remove 
chips and similar material only with the machine at 
standstill.
Metabo S-automatic safety clutch. When the safety 
clutch responds, switch off the machine immedi-
ately! If the tool jams or catches, the power supply 
to the motor is restricted. Due to the strong force 
which can arise, always hold the machine with both 
hands using the handles provided, stand securely 
and concentrate.
The Metabo S-automatic safety clutch must not be 
used for torque control.
Caution with hard screwdriving (driving of screws 
with either a metric or an imperial thread into steel)! 
The head of the screw may rip off or high restoring 
torques may be incurred at the handle.
Dust from material such as paint containing lead, 
some wood species, minerals and metal may be 
harmful. Contact with or inhalation of the dust may 
cause allergic reactions and/or respiratory diseases 
to the operator or bystanders. 
Certain kinds of dust are classified as carcinogenic 
such as oak and beech dust especially in conjunc-
tion with additives for wood conditioning (chromate, 
wood preservative). Material containing asbestos 
must only be treated by specialists.
- Where the use of a dust extraction device is 

possible it shall be used.

- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is recom-

mended.

Follow national requirements for the materials you 
want to work with.

Illustrations are provided at the beginning of the 
operating instructions.

Symbol explanation:

 Normal drilling/Drill bit

 Impact drilling

 Movement direction

 Driving screws/Screw
 Slow
 Fast

 Thread tapping/Thread tapper

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Figures