Metabo PowerMaxx SSD 12 601114840 - Инструкция по эксплуатации - Страница 9

ENGLISH

en

9

Original instructions

We hereby declare under our sole responsibility 

that these cordless impact drivers, identified by type 

and serial number *1), meet all relevant 

requirements of directives *2) and standards *3). 

Technical documents for *4) - see page 3.

The impact driver is suitable for driving in and 

removing screws.
The user bears sole responsibility for any damage 

caused by inappropriate use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your power tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Read the operating 

instructions to reduce the risk of injury.

WARNING – Read all safety warnings, 

instructions, illustrations and 

specifications provided with this power tool.

Failure to follow all instructions listed below may 

result in electric shock, fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Always include these documents when passing on 

your power tool.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 

exposed metal parts of the power tool "live" and 

could give the operator an electric shock.

Remove the battery pack from the machine before 

making any adjustments, changing tools, 

maintaining or cleaning.
Make sure that the tool is switched off before fitting 

the battery pack.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).
Secure the workpiece to prevent slipping or rotation 

(e.g. by securing with screw clamps).

Protect battery packs from water and 

moisture!

Do not expose battery packs to fire!

Do not use faulty or deformed battery packs!

Do not open battery packs!

Do not touch or short circuit battery pack contacts!

A slightly acidic, flammable fluid may leak 

from defective Li-ion battery packs! 
If battery fluid leaks out and comes into 

contact with your skin, rinse immediately 

with plenty of water. If battery fluid leaks out 

and comes into contact with your eyes, wash them 

with clean water and seek medical attention 

immediately!
If the machine is defective, remove the battery pack 

from the machine.
Only screwdriving bits suitable for the impact 

drivers must be used.
Take care when driving in long screws - risk of 

slipping.
Mount the machine on the screw only when it is 

switched off.
Wear ear protectors.
Materials that generate dusts or vapours that may 

be harmful to health (e.g. asbestos) must not be 

processed.
LED light (5): do not observe the LED radiation 

directly with optical instruments.

CAUTION Do not stare at operating lamp.

Reducing dust exposure:

WARNING

 - Some dust created by power 

sanding, sawing, grinding, drilling, and other 

construction activities contains chemicals known to 

cause cancer, birth defects or other reproductive 

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- Crystalline silica from bricks and cement and 

other masonry products, and

- Arsenic and chromium from chemically treated 

lumber.

Your risk from these exposures varies, depending 

on how often you do this type of work. To reduce 

your exposure to these chemicals: work in a well-

ventilated area, and work with approved safety 

equipment, such as those dust masks that are 

specially designed to filter out microscopic 

particles.
This also applies to dust from other materials such 

as some timber types (like oak or beech dust), 

metals, asbestos. Other known diseases are e.g. 

allergic reactions, respiratory diseases. Do not let 

dust enter the body.
Observe the relevant guidelines and national 

regulations for your material, staff, application and 

place of application (e.g. occupational health and 

safety regulations, disposal).

1. Declaration of Conformity

2. Specified Conditions of Use

3. General Safety Information

4. Special Safety Instructions