Metabo PowerMaxx BS 12В 600984500 - Инструкция по эксплуатации - Страница 8

ENGLISH

en

8

Original instructions

We, being solely responsible, hereby declare that 

this product conforms to the standards and 

directives specified on page 3.

The cordless drill/driver is suitable for screwing, 

drilling and thread cutting.
The user bears sole responsibility for any damage 

caused by improper use.
Generally accepted accident prevention 

regulations and the enclosed safety information 

must be observed.

For your own protection and for the 

protection of your electrical tool, pay 

attention to all parts of the text that are 

marked with this symbol!

WARNING

 – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING Read all safety warnings and 

instructions.

Failure to follow all safety warn-

ings and instructions may result in electric shock, 

fire and/or serious injury.

Keep all safety instructions and information for 

future reference.

Pass on your electrical tool only together with these 

documents.

Hold the power tool by insulated gripping 

surfaces, when performing an operation where 

the cutting accessory may contact hidden 

wiring or its own cord.

 Cutting accessory 

contacting a "live" wire may make exposed metal 

parts of the power tool "live" and could give the 

operator an electric shock.
Ensure that the spot where you wish to work is free 

of 

power cables, gas lines or water pipes

 (e.g. 

using a metal detector).

Slightly acidic, flammable fluid may leak from 

defective Li-ion battery packs!

If battery fluid leaks out and comes into contact with 

your skin, rinse immediately with plenty of water. If 

battery fluid leaks out and comes into contact with 

your eyes, wash them with clean water and seek 

medical attention immediately.

Protect battery  packs from water and 

moisture!

Do not use faulty or deformed battery packs!

Do not expose battery packs to naked flame!

Do not open battery packs!
Do not touch or short-circuit battery packs!
Remove the battery pack from the machine before 

any adjustment or maintenance is carried out.
Before fitting the battery pack, make sure that the 

machine is switched off.
Keep hands away from the rotating tool!
Remove chips and similar material only with the 

machine at standstill.
Dust from material such as paint containing lead, 

some wood species, minerals and metal may be 

harmful. Contact with or inhalation of the dust may 

cause allergic reactions and/or respiratory diseases 

to the operator or bystanders. 

Certain kinds of dust are classified as carcinogenic 

such as oak and beech dust especially in 

conjunction with additives for wood conditioning 

(chromate, wood preservative). Material containing 

asbestos must only be treated by specialists.

- Where the use of a dust extraction device is 

possible it shall be used.

- The work place must be well ventilated.

- The use of a dust mask of filter class P2 is 

recommended.

Follow national requirements for the materials you 

want to work with.
LED (2): Do not view LEDs directly through optical 

instruments, LED class 1M, classified as per DIN 

EN 60825-1: 2003, wavelength: 400-780 nm; 

t

imp

=300 µs, 5 lm.

See page 2.

1

Protective cap/bit clamping bush*

2

LED lights

3

Adjusting sleeve (torque control, maximum 
torque)

4

Slide-switch (1st/2nd gear)

5

Rotation selector switch (direction of rotation 
setting, transporting safety device)

6

Trigger

7

Battery pack release button

8

Battery pack

* depending on model

6.1 The machine's multifunctional monitoring 

system

If the machine switches off automatically, the 

machine electronics have activated automatic 

protection mode. A warning signal sounds 

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

5. Overview

6. Use