Makita HP347DWE - Инструкция по эксплуатации - Страница 4

4 

• 

The declared vibration emission value may also be 
used in a preliminary assessment of exposure. 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-15 

For European countries only 

EC Declaration of Conformity 

We Makita Corporation as the responsible 
manufacturer declare that the following Makita 
machine(s): 

Designation of Machine:   
Cordless Hammer Driver Drill 
Model No./ Type: HP347D,HP457D 
are of series production and 

Conforms to the following European Directives: 

2006/42/EC 

And are manufactured in accordance with the following 
standards or standardised documents: 

EN60745 

The technical documentation is kept by our authorised 
representative in Europe who is:   

Makita International Europe Ltd. 
Michigan Drive, Tongwell, 
Milton Keynes, Bucks MK15 8JD, England 
 

23.8.2010

000230 

Tomoyasu Kato 

Director 

Makita Corporation 

3-11-8, Sumiyoshi-cho, 

Anjo, Aichi, 446-8502, JAPAN 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB056-3 

CORDLESS HAMMER DRILL 
SAFETY WARNINGS 

1. 

Wear ear protectors when impact drilling.

Exposure to noise can cause hearing loss. 

2. 

Use auxiliary handle(s), if supplied with the 
tool.

 Loss of control can cause personal injury. 

3. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the cutting accessory may contact 
hidden wiring.

 Cutting accessory contacting a 

"live" wire may make exposed metal parts of the 
power tool "live" and could give the operator an 
electric shock. 

4. 

Always be sure you have a firm footing. 
Be sure no one is below when using the tool in 
high locations. 

5. 

Hold the tool firmly.   

6. 

Keep hands away from rotating parts. 

7. 

Do not leave the tool running. Operate the tool 
only when hand-held. 

8. 

Do not touch the bit or the workpiece 
immediately after operation; they may be 
extremely hot and could burn your skin. 

9. 

Some material contains chemicals which may 
be toxic. Take caution to prevent dust 
inhalation and skin contact. Follow material 
supplier safety data. 

SAVE THESE INSTRUCTIONS. 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. MISUSE or 
failure to follow the safety rules stated in this 
instruction manual may cause serious personal 
injury. 

ENC009-1 

IMPORTANT SAFETY 
INSTRUCTIONS 
FOR BATTERY CARTRIDGE 

1. 

Before using battery cartridge, read all 
instructions and cautionary markings on (1) 
battery charger, (2) battery, and (3) product 
using battery. 

2. 

Do not disassemble battery cartridge. 

3. 

If operating time has become excessively 
shorter, stop operating immediately. It may 
result in a risk of overheating, possible burns 
and even an explosion. 

4. 

If electrolyte gets into your eyes, rinse them 
out with clear water and seek medical 
attention right away. It may result in loss of