Makita HP332DZ - Инструкция по эксплуатации - Страница 10

10 ENGLISH

Drilling in metal

To prevent the drill bit from slipping when starting a 

hole, make an indentation with a center-punch and 

hammer at the point to be drilled. Place the point of the 

drill bit in the indentation and start drilling.

Use a cutting lubricant when drilling metals. The excep

-

tions are iron and brass which should be drilled dry.

CAUTION:

Pressing excessively on the tool 

will not speed up the drilling.

 In fact, this excessive 

pressure will only serve to damage the tip of your drill 

bit, decrease the tool performance and shorten the 

service life of the tool.

CAUTION:

Hold the tool firmly and exert care 

when the drill bit begins to break through the 

workpiece.

 There is a tremendous force exerted on 

the tool/drill bit at the time of hole break through.

CAUTION:

A stuck drill bit can be removed 

simply by setting the reversing switch to reverse 

rotation in order to back out. However, the tool 

may back out abruptly if you do not hold it firmly.

CAUTION:

Always secure small workpieces 

in a vise or similar hold-down device.

CAUTION:

If the tool is operated continuously 

until the battery cartridge has discharged, allow 

the tool to rest for 15 minutes before proceeding 

with a fresh battery.

Using the tool as a hand screwdriver

► 

Fig.14

Switch off the tool.  

Move the reversing switch lever to the neutral position. 

Turn the action mode changing ring so that the arrow 

points to the 

 marking. 

Turn the tool.

NOTE:

 This use is convenient for checking the 

screwdriving.

NOTE:

 Do not use the tool for work requiring excessive 

force, such as tightening bolt or removing rusted screws.

Using holster

Optional accessory

CAUTION:

When using the holster, remove a 

driver bit/drill bit from the tool.

CAUTION:

Turn off the tool and wait until it 

comes to a complete stop before placing it in the 

holster.  

Be sure to close the holster securely with the 

holster button so that it holds the tool firmly.

1.

  Thread a waist belt or similar through holster 

holder.

► 

Fig.15:

1.

 Holster holder 

2.

 Waist belt

2.

  Put the tool in the holster and lock it with the hol

-

ster button.

► 

Fig.16

► 

Fig.17

You can keep two driver bits at the front of the holster.

MAINTENANCE

CAUTION:

Always be sure that the tool is 

switched off and the battery cartridge is removed 

before attempting to perform inspection or 

maintenance.

NOTICE:

Never use gasoline, benzine, thinner, 

alcohol or the like. Discoloration, deformation or 

cracks may result.

To maintain product SAFETY and RELIABILITY, 

repairs, any other maintenance or adjustment should 

be performed by Makita Authorized or Factory Service 

Centers, always using Makita replacement parts.

OPTIONAL 

ACCESSORIES

CAUTION:

These accessories or attachments 

are recommended for use with your Makita tool 

specified in this manual.

 The use of any other 

accessories or attachments might present a risk of 

injury to persons. Only use accessory or attachment 

for its stated purpose.

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service 

Center.

• 

Drill bits

• 

Driver bits

• 

Socket bits

• 

Tungsten-carbide tipped drill bit

• 

Blow-out bulb

• 

Driver bit holder

• Hook
• Holster

• 

Makita genuine battery and charger

NOTE:

 Some items in the list may be included in the 

tool package as standard accessories. They may 

differ from country to country.