Makita G-серия HP488DWE - Инструкция по эксплуатации - Страница 4

4 ENGLISH

ENGLISH (Original instructions)

SPECIFICATIONS

Model:

HP488D

Drilling capacities

Masonry

13 mm

Steel

13 mm

Wood

36 mm

Fastening capacities

Wood screw

6 mm x 75 mm

Machine screw

M6

No load speed

High (2)

0 - 1,400 min

-1

Low (1)

0 - 400 min

-1

Blows per minute

High (2)

0 - 21,000 min

-1

Low (1)

0 - 6,000 min

-1

Overall length

239 mm

Rated voltage

D.C. 18 V

Net weight

1.8 kg

• 

Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• 

Specifications may differ from country to country.

• 

Weight, with battery cartridge, according to EPTA-Procedure 01/2014

Applicable battery cartridge and charger

Battery cartridge

BL1815G / BL1820G

Charger

DC18WA / DC18WB

• 

Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.

WARNING:

Only use the battery cartridges and chargers listed above.

 Use of any other battery cartridges 

and chargers may cause injury and/or fire.

Symbols

The followings show the symbols which may be used 

for the equipment. Be sure that you understand their 

meaning before use.

Read instruction manual.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or 

battery pack together with household waste 

material!

In observance of the European Directives, 

on Waste Electric and Electronic 

Equipment and Batteries and Accumulators 

and Waste Batteries and Accumulators 

and their implementation in accordance 

with national laws, electric equipment and 

batteries and battery pack(s) that have 

reached the end of their life must be col

-

lected separately and returned to an envi-

ronmentally compatible recycling facility.

Intended use

The tool is intended for impact drilling in brick, brickwork 

and masonry. It is also suitable for screw driving and 

drilling without impact in wood, metal, ceramic and 

plastic.

Noise

The typical A-weighted noise level determined accord

-

ing to EN62841-2-1:

Sound pressure level (L

pA

) : 81 dB(A)

Sound power level (L

WA

) : 92 dB (A)

Uncertainty (K) : 3 dB(A)

NOTE:

The declared noise emission value(s) has been 

measured in accordance with a standard test method 

and may be used for comparing one tool with another.

NOTE:

 The declared noise emission value(s) may 

also be used in a preliminary assessment of exposure.

WARNING:

Wear ear protection.

WARNING:

The noise emission during actual 

use of the power tool can differ from the declared 

value(s) depending on the ways in which the 

tool is used especially what kind of workpiece is 

processed.

WARNING:

Be sure to identify safety mea

-

sures to protect the operator that are based on an 

estimation of exposure in the actual conditions of 

use (taking account of all parts of the operating 

cycle such as the times when the tool is switched 

off and when it is running idle in addition to the 

trigger time).