Makita DHP453RFE - Инструкция по эксплуатации - Страница 4

4 

WARNING: 

• 

The vibration emission during actual use of the 
power tool can differ from the declared emission 
value depending on the ways in which the tool is 
used. 

• 

Be sure to identify safety measures to protect the 
operator that are based on an estimation of 
exposure in the actual conditions of use (taking 
account of all parts of the operating cycle such as 
the times when the tool is switched off and when it 
is running idle in addition to the trigger time). 
 

ENH101-17 

For European countries only 

EC Declaration of Conformity 

Makita declares that the following Machine(s): 

Designation of Machine:   
Cordless Hammer Driver Drill 
Model No./ Type: DHP343, DHP453 

Conforms to the following European Directives: 

2006/42/EC 

They are manufactured in accordance with the following 
Standard or standardized  documents: 

EN60745 

The Technical file in accordance with 2006/42/EC is 
available from: 

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 
 

31.12.2013 

000331 

Yasushi Fukaya 

Director 

Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 

GEA010-1 

General Power Tool Safety 
Warnings 

WARNING Read all safety warnings and all 

instructions.

 Failure to follow the warnings and 

instructions may result in electric shock, fire and/or 
serious injury. 

Save all warnings and instructions for 
future reference. 

GEB056-4 

CORDLESS HAMMER DRIVER 
DRILL SAFETY WARNINGS 

1. 

Wear ear protectors with impact drilling.

Exposure to noise can cause hearing loss. 

2. 

Use auxiliary handle(s), if supplied with the 
tool.

 Loss of control can cause personal injury. 

3. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the cutting accessory may contact 
hidden wiring.

 Cutting accessory contacting a 

"live" wire may make exposed metal parts of the 
power tool "live" and could give the operator an 
electric shock. 

4. 

Hold power tool by insulated gripping 
surfaces, when performing an operation 
where the fastener may contact hidden wiring.

Fasteners contacting a "live" wire may make 
exposed metal parts of the power tool "live" and 
could give the operator an electric shock. 

5. 

Always be sure you have a firm footing. 
Be sure no one is below when using the tool in 
high locations. 

6. 

Hold the tool firmly.   

7. 

Keep hands away from rotating parts. 

8. 

Do not leave the tool running. Operate the tool 
only when hand-held. 

9. 

Do not touch the bit or the workpiece 
immediately after operation; they may be 
extremely hot and could burn your skin. 

10. 

Some material contains chemicals which may 
be toxic. Take caution to prevent dust 
inhalation and skin contact. Follow material 
supplier safety data. 

SAVE THESE INSTRUCTIONS. 

WARNING: 

DO NOT let comfort or familiarity with product 
(gained from repeated use) replace strict adherence 
to safety rules for the subject product. MISUSE or 
failure to follow the safety rules stated in this 
instruction manual may cause serious personal 
injury.