Шуруповерты Hilti SFD 2-A BULK 2081465 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
*2248872*
2248872
English
7
lead to disorders of the blood vessels and nervous system in the fingers,
hands and wrists.
Electrical safety
▶
Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the power tool may
give you an electric shock if you damage an electric cable accidentally.
Power tool use and care
▶
Immediately switch off the power tool if the accessory tool jams. The
power tool might twist off-line.
▶
Wait until the power tool stops completely before you lay it down.
2.4 Battery use and care
▶
Observe the special regulations and instructions applicable to the trans-
port, storage and use of Li-ion batteries.
▶
Do not expose batteries to high temperatures, direct sunlight or fire.
▶
Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶
Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your
Hilti Service
.
▶
If the battery is too hot to touch it may be defective. In this case, place the
product in a non-flammable location, well away from flammable materials,
where it can be kept under observation and allowed to cool down. In this
case, always contact your
Hilti Service
.
3
Description
3.1 Overview of the product
@
1/4" hex. socket with locking
sleeve
;
Torque and drilling mode se-
lector ring
=
Gear speed selection switch
%
Forward/reverse selector
switch with safety lock
&
Grip
(
Lamp
)
Belt hook (optional)
+
Battery state of charge indica-
tor
§
Battery release button
/
Control switch (with electronic
speed control)
3.2 Intended use
The product described is a hand-held cordless drill/driver. It is designed for
driving and removing screws and for drilling in steel, wood and plastic.
▶
Use only
Hilti
Li-ion batteries of the B22 series with this product.
▶
Use only
Hilti
-approved battery chargers to charge these batteries. More
information is available from your
Hilti Store
or from
www.hilti.group
.
Printed: 05.07.2019 | Doc-Nr: PUB / 5501914 / 000 / 00
