Шуруповерты GreenWorks GD24DD35 3704007 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
8
WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner’s manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
9
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
GLOBGRO AB
Globe Group Europe
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name:
Peter Söderström
Address:
Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
Drill Driver
Model:
DDG401
Serial number:
See product rating label
Year of Construction:
See product rating label
•
is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
•
is in conformity with the provisions of the following
other EC-Directives:
•
2011/65/EU & (EU)2015/863
•
2014/30/EU
Furthermore, we declare that the following parts, clauses of
European harmonised standards have been used:
•
EN 62841-1;EN 62841-2-1; EN 55014-1; EN 55014-2;
IEC 62321-3-1; IEC 62321-4; IEC 62321-5; IEC
62321-6; IEC 62321-7-1; IEC 62321-7-2; IEC 62321-8
Place, date: Malmö, 01.01.2020
Signature: Ted Qu,
Quality Director
7
English
EN
