FLEX MXE 1001 + WR3R 461393 - Инструкция по эксплуатации - Страница 16

MXE 1000/MXE 1001/MXE 1002/MXE 1200/MXE 1202/MXE 1602

16

Overload protection

In the event of a short and extreme 

overload, the overload protection device 

prevents damage to the motor by switching 

the tool off automatically.

For further information on the 

manufacturer’s products go to 

www.flex-tools.com.

Maintenance and care

WARNING!

Before performing any work on the mixer, 

pull out the mains plug.

Cleaning



Regularly clean the power tool and 

ventilation slots.



Regularly blow out the housing interior 

and motor with dry compressed air.



Clean the mixer paddle straight after use. 

Do not allow the mixed product to dry on.

Gear

NOTE

Do not loosen the screws on the gear head 

during the warranty period. Failure to comply 

with this requirement will invalidate any 

claims under the manufacturer's warranty.

Repairs

Repairs may be carried out by an authorised 

customer service centre only.

Spare parts and accessories

Mixer paddles for different applications and 

other accessories can be gleaned from 

the manufacturer’s catalogues.

Exploded drawings and sparepart lists can 

be found on our homepage: 

www.flex-tools.com

Disposal information

WARNING!

Render disused power tools unusable by 

removing the power cord.

EU countries only.

Do not dispose of electric power tools 

in the household waste! 

In accordance with the European Directive 

2012/19/EU on Waste Electrical and 

Electronic Equipment and its incorporation 

into national law, used power tools must be 

collected separately and recycled in an 

environmentally friendly manner.

NOTE!

Please ask your dealer about disposal 

options.

-Declaration of Conformity

We declare on our sole responsibility that the 

product described in “Technical specifications” 

conforms to the following standards or 

normative documents:

EN 60745 according to the provisions of 

Directives 2014/30/EU, 2006/42/EC, 

2011/65/EU.

Responsible for technical documents:

FLEX-Elektrowerkzeuge GmbH, R & D

Bahnhofstrasse 15, D-71711 Steinheim/Murr

07.03.2018

FLEX-Elektrowerkzeuge GmbH

Bahnhofstrasse 15, D-71711 Steinheim/Murr

Exemption from liability

The manufacturer and his representative 

are not liable for any damage and lost profits 

due to interruption in business caused by 

the product or by an unusable product. The 

manufacturer and his representative are not 

liable for any damage which was caused by 

improper use of the power tool or by use of 

the power tool with products from other 

manufacturers.