FLEX MXE 1001 + RB 120 459224 - Инструкция по эксплуатации - Страница 15

MXE 1000/MXE 1001/MXE 1002/MXE 1200/MXE 1202/MXE 1602

15

Regulating the speed

(MXE 1200/1202)



To adjust the maximum working speed, 

set the speed preselector switch to the 

desired stage.

Switching the mixer on and off

The mixers are equipped with an 

accelerator switch. It allows the speed to be 

gradually increased up to working speed. 
Switching on without locking:



Press and hold down the switch (1.).



To switch off, release the switch (2.).

Switching on with locking:



Press and hold down the switch (1.).



To lock into position, hold down the 

locking button (2.) and release the switch.



To switch off, briefly press and then 

release the switch (3.).

NOTE!

If the mixer does not turn after switching on:

–

Switch the power tool off (release lock by 

pressing switch).

–

Rotate the mixer paddle manually by 45°.

–

Switch the power tool back on again.

Operating instructions



After it has been switched off, the mixer 

runs on for a short time.



If the rotating mixer paddle strikes 

a surface, it could cause a jolt.



Only switch on the tool after the mixer 

paddle has been immersed in the 

product to be mixed. When doing this, 

slowly press the switch and wait until the 

tool has reached maximum speed.



When taking a break from work, place the 

tool down on the rests.

Speed

I

II

Stage

1

210

320

2

325

490

3

530

780