Einhell TE-CD 12/1 Li 4513594 - Инструкция по эксплуатации - Страница 20

GB

- 20 -

4. Technical data

Motor power supply:  ............................... 12 V DC
Idling speed: ............................ 0-400/0-1400 rpm
Torque settings:  ..........................................  19+1
Clockwise/counter-clockwise:  ........................Yes
Clamping range of drill chuck:  .......... max. 10 mm
Battery charger output voltage:  .............. 12 V DC
Battery charger output current:  ....................... 3 A
Charging unit supply voltage:  ..............................   

............................................. 100-240V~ 50-60Hz
Charging time:  .......................................... 45 min.
Battery type:  ............................................... Li-Ion
Number of battery cells:  ...................................  3
Battery capacitance:  ................................. 2.0 Ah
Weight:  .......................................................1.1 kg
Max. screw diameter:  ................................. 6 mm

The maximum screw diameter indicates the ma-

ximum diameter of the screw that can be screwed 

into wood. The screw diameter can vary depen-

ding on the type of wood.

Danger!

Sound and vibration

Sound and vibration values were measured in 

accordance with EN 60745.

L

pA

 sound pressure level  ........................ 67 dB(A)

K

pA

 uncertainty  ............................................. 3 dB

L

WA

 sound power level   .......................... 78 dB(A)

K

WA

 uncertainty ............................................. 3 dB

Wear ear-mu

ff

 s.

The impact of noise can cause damage to hea-

ring.

Total vibration values (vector sum of three direc-

tions) determined in accordance with EN 60745.

Drilling in metal

Vibration emission value a

h

≤

 2,5 m/s

2

K uncertainty = 1.5 m/s

2

Screwing without impact action

Vibration emission value a

h

≤

 2,5 m/s

2

K uncertainty = 1.5 m/s

2

The speci

fi

 ed vibration value was established in 

accordance with a standardized testing method. It 

may change according to how the electric equip-

ment is used and may exceed the speci

fi

 ed value 

in exceptional circumstances.

The speci

fi

 ed vibration value can be used to 

compare the equipment with other electric power 

tools.

The speci

fi

 ed vibration value can be used for initi-

al assessment of a harmful e

ff

 ect.

Keep the noise emissions and vibrations to a 

minimum.

• 

 Only use appliances which are in perfect wor-

king order.

• 

 Service and clean the appliance regularly.

• 

 Adapt your working style to suit the appliance.

• 

 Do not overload the appliance.

• 

 Have the appliance serviced whenever ne-

cessary.

• 

 Switch the appliance off when it is not in use.

• 

 Wear protective gloves.

Caution!

Residual risks

Even if you use this electric power tool in 

accordance with instructions, certain resi-

dual risks cannot be rules out. The following 

hazards may arise in connection with the 

equipment’s construction and layout:

1.   Lung damage if no suitable protective dust 

mask is used.

2.   Damage to hearing if no suitable ear protec-

tion is used.

3.   Health damage caused by hand-arm vib-

rations if the equipment is used over a pro-

longed period or is not properly guided and 

maintained.

Danger! 

The electric power tool generates an electro-

magnetic 

fi

 eld during operation. Under certain 

circumstances this 

fi

 eld may actively or passively 

impede medical implants. To reduce the risk of 

serious or fatal injuries, we recommend persons 

with medical implants to consult their doctor and 

the manufacturer of the medical implant prior to 

using the equipment.

Limit the operating time.

All stages of the operating cycle must be conside-

red (for example, times in which the electric tools 

are switched o

ff

  and times in which the tool is 

switched on but operates without load).

Anl_TE_CD_12_1_Li_SPK9.indb   20

Anl_TE_CD_12_1_Li_SPK9.indb   20

06.09.2018   17:05:41

06.09.2018   17:05:41