Dewalt DCF840N-XJ - Инструкция по эксплуатации - Страница 11

9

English

nOTE:

 Battery packs should not be stored completely 

depleted of charge. The battery pack will need to be recharged 
before use.

Labels on Charger and Battery Pack

In addition to the pictographs used in this manual, the 
labels on the charger and the battery pack may show the 
following pictographs:

Read instruction manual before use.

See 

Technical Data

 for charging time.

Do not probe with conductive objects.

Do not charge damaged battery packs.

Do not expose to water. 

Have defective cords replaced immediately.

Charge only between 4 ˚C and 40 ˚C.

Only for indoor use.

Discard the battery pack with due care for 
the environment.

Charge 

D

e

WALT

 battery packs only with designated 

D

e

WALT

 chargers. Charging battery packs other 

than the designated 

D

e

WALT

 batteries with a 

D

e

WALT

 charger may make them burst or lead to 

other dangerous situations.

Do not incinerate the battery pack.

USE (without transport cap). Example: Wh rating 
indicates 108 Wh (1 battery with 108 Wh). 
TRANSPORT (with built-in transport cap). Example: 
Wh rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The DCF840 operates on an 18V volt battery pack.
These battery packs may be used: DCB181, DCB182, DCB183, 
DCB183B, DCB184, DCB184B, DCB185, DCB187, DCB189, 
DCB546, DCB547, DCB548. Refer to 

Technical Data

 for 

more information.

Package Contents

The package contains:
1   Impact  driver

1   Charger
1   Belt hook (included with some models)
1   Kitbox (included with some models)
1    LLi-Ion battery pack (C1, D1, E1, L1, M1, P1, S1, T1, X1, Y1 

models)

2    Li-Ion battery packs (C2, D2, E2, L2, M2, P2, S2, T2, X2, 

Y2 models)

3    Li-Ion battery packs (C3, D3, E3, L3, M3, P3, S3, T3, X3, Y3 

models)

1   Instruction  manual

•  Check for damage to the tool, parts or accessories which may 

have occurred during transport.

•  Take the time to thoroughly read and understand this manual 

prior to operation.

Markings on Tool

The following pictograms are shown on the tool:

Read instruction manual before use.

Wear ear protection.

Wear eye protection.

Visible radiation. Do not stare into light.

Date Code Position (Fig. A)

The date code 

 10 

, which also includes

the year of manufacture, 

is printed into the housing.
Example:

2021 XX XX

Year of Manufacture

Description (Fig. A)

WARNING: 

Never modify the power tool or any part of it. 

Damage or personal injury could result.

1 

Trigger switch

2 

Forward/reverse button

3 

Chuck collar

4 

6.35 mm hex quick-release 
chuck

5 

Battery release button

6 

Battery pack

7 

Worklights

8 

Belt hook (included with 
some models)

9 

Screw

Intended Use

This impact driver is designed for professional impact 
screwdriving applications. The impact function makes this 
tool particularly useful for driving fasteners in wood, metal 
and concrete. 

DO nOT 

use under wet conditions or in the presence of 

flammable liquids or gases.
This impact driver is a professional power tool.