Bosch GSR 6-25 TE Professional 0.601.445.000 - Инструкция по эксплуатации - Страница 13

 English | 

13

Bosch Power Tools

2 609 932 794 | (21.3.11)

Adjusting the Speed

The speed of the switched on power tool can be variably ad-

justed, depending on how far the On/Off switch 

7

 is pressed.

Light pressure on the On/Off switch 

7

 results in a low rotation-

al speed. Further pressure on the switch results in an increase 

in speed.

Adjusting the Screw-in Depth (see figure B)

With the adjustment sleeve 

3

, the screw-in depth of the screw 

head into the workpiece can be preset in 8 locking steps per 

full turn. Each step corresponds with a 0.25 mm change of 

the screw-in depth.
Turning the adjustment sleeve 

3

 in clockwise direction results 

in a greater screw-in depth; turning in anticlockwise direction 

reduces the screw-in depth.
The required setting is best determined by testing.

Working Advice

f

Apply the power tool to the screw only when it is 

switched off. 

Rotating tool inserts can slip off.

Guide the screw toward the screwdriving bit 

1

. The screw is 

held in place by the magnet pull of the universal bit holder 

10

. 

Firmly push the tip of the screw into the material to be 

screwed until the screwing-depth stop 

4

 faces against the 

workpiece.
Switch the machine on. The screw is screwed into the materi-

al until the adjusted screw-in depth is reached. The drive is 

disengaged and the tool holder no longer rotates. Check the 

screw-in depth and readjust, if required.
For unscrewing screws, set the rotational direction switch 

8

to left rotation and pull off the screwing-depth stop 

4

 toward 

the front without turning the adjustment sleeve.

Working with the screwing-depth stop 

4

 is also possible when 

adapting the screw-in depth.

Belt Clip

With the belt clip 

5

, the machine can be hung onto a belt. The 

user has both hands free and the machine is always at hand.

Maintenance and Service

Maintenance and Cleaning

f

Before any work on the machine itself, pull the mains 

plug.

f

For safe and proper working, always keep the machine 

and ventilation slots clean.

If the machine should fail despite the care taken in manufac-

turing and testing procedures, repair should be carried out by 

an after-sales service centre for Bosch power tools.
In all correspondence and spare parts order, please always in-

clude the 10-digit article number given on the type plate of 

the machine.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concern-

ing maintenance and repair of your product as well as spare 

parts. Exploded views and information on spare parts can al-

so be found under:

www.bosch-pt.com

Our customer service representatives can answer your ques-

tions concerning possible applications and adjustment of 

products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)

P.O. Box 98

Broadwater Park

North Orbital Road

Denham

Uxbridge

UB 9 5HJ

Tel. Service: +44 (0844) 736 0109

Fax: +44 (0844) 736 0146

E-Mail: boschservicecentre@bosch.com

Ireland

Origo Ltd.

Unit 23 Magna Drive

Magna Business Park

City West

Dublin 24

Tel. Service: +353 (01) 4 66 67 00

Fax: +353 (01) 4 66 68 88

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.

Power Tools

Locked Bag 66

Clayton South VIC 3169

Customer Contact Center

Inside Australia:

Phone: +61 (01300) 307 044

Fax: +61 (01300) 307 045

Inside New Zealand:

Phone: +64 (0800) 543 353

Fax: +64 (0800) 428 570

Outside AU and NZ:

Phone: +61 (03) 9541 5555

www.bosch.com.au

Republic of South Africa
Customer service

Hotline: +27 (011) 6 51 96 00

Gauteng – BSC Service Centre

35 Roper Street, New Centre

Johannesburg

Tel.: +27 (011) 4 93 93 75

Fax: +27 (011) 4 93 01 26

E-Mail: bsctools@icon.co.za

OBJ_BUCH-137-006.book  Page 13  Monday, March 21, 2011  10:51 AM