Bosch GSR 36 VE-2-LI 0.601.9C0.100 - Инструкция по эксплуатации - Страница 11

10

 | English 

1 6

09 92A 0WX | (20.10.14)

Bosch Power Tools



In case of damage and improper use of the battery, va-

pours may be emitted. Ventilate the area and seek 

medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 

power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery can be damaged by pointed objects such as 

nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 

smoke, explode or overheat.



Insert the battery pack completely. When doing this, 

the battery pack can be heard to engage twice. 

Additional Safety and Working Instructions



Dusts from materials such as lead-containing coatings, 

some wood types, minerals and metal can be harmful to 

one’s health and cause allergic reactions, lead to res-

piratory infections and/or cancer.

 Materials containing 

asbestos may only be worked by specialists.

–

Provide for good ventilation of the working place.

–

It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-

rials to be worked.



The battery is supplied partially charged. To ensure full 

battery capacity, completely charge the battery in the 

battery charger before using for the first time.



Read the operating instructions of the battery charger.



Apply the power tool to the screw only when it is 

switched off. 

Rotating tool inserts can slip off.



Adjust the gear switch only when the machine is at a 

complete stop.



Always push the gear selector and turn the operating 

mode selector switch through to the stop. 

Otherwise, 

the machine can become damaged.



In case of excessive loading, e. g., prolonged blocking 

of the application tool, the electronics switch off the 

power tool. After switching on again, the power tool 

can be used again as intended for. In case of continued 

overload, the power tool will switch off again in order 

to prevent damage to the motor.

To save energy, only switch the power tool on when using it.



Before performing any work, make sure that the auxil-

iary handle is firmly tightened. 

Loss of control can lead 

to injury.

Rapid Shut-off



The rapid shut-off feature enables better control of the 

power tool. The power tool shuts off in case of sudden and 

unexpected rotation of the power tool around the drilling 

axis.



The rapid shut-off feature is indicated by a flashing LED on 

the power tool.



To 

restart the machine

, release the On/Off switch and 

then actuate again.



Rapid shut-off can trigger only when the power tool is 

running at maximum operating speed and can rotate 

freely around the drill bit axis. 

Choose a suitable work 

position for this. Otherwise, rapid shut-off will not be en-

sured.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the 

symbols and their meaning. The correct interpretation of the 

symbols will help you to use the machine in a better and safer 

manner.

Symbol

Meaning

GSR 36 VE-2-LI / GSB 36 VE-2-LI : 

Cordless screwdriver / Combination 

cordless drill
Grey-marked area: Handle (insulated 

gripping surface)

Article number

Read all safety warnings and all 

instructions.

Before any work on the machine itself, 
remove the battery.

Always wear ear protection.

Movement direction

Reaction direction

Screwdriving

Drilling and screwdriving

Impact drilling

Low speed

High speed

OBJ_BUCH-1916-002.book  Page 10  Monday, October 20, 2014  12:17 PM