Bosch GSR 14,4 V-EC FC2 0.601.9E1.001 - Инструкция по эксплуатации - Страница 12

12

 | English 

1 6

09 92A 14Z | (12.1.15)

Bosch Power Tools

Delivery Scope

Cordless drill/driver, keyless chuck (GFA FC2).
The battery, application tool and other accessories shown or 
described are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-

cessories program.

Intended Use

The power tool is intended for driving and loosening screws 

and for drilling in wood, metal and plastic.
The power tool can be used with an angle drill head 

(GWA FC2) (accessory), off-set angle adapter (GEA FC2) 

(accessory) or keyless chuck (GFA FC2) (delivery scope).
Angle drill head (GWA FC2), off-set angle adapter (GEA FC2) 
and keyless chuck (GFA FC2) may be used only with the cord-

less drill/drivers GSR 14,4 V-EC FC2 and GSR 18 V-EC FC2.

Note: 

A torque must be pre-selected when driving or tightening met-
ric screws using the angle drill head (GWA FC2). Otherwise 

there is a risk of gearbox damage.
The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 

household room illumination.

Technical Data

The technical data of the machine are listed in the table on 

page 203.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation 

1194/2012), 2011/65/EU, 2004/108/EC, 2006/42/EC 
including their amendments and complies with the following 
standards: EN 60745-1, EN 60745-2-1, EN 60745-2-2.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division

70764 Leinfelden-Echterdingen, GERMANY

Leinfelden, 12.01.2015

Noise/Vibration Information

The measured values of the machine are listed in the table on 
page 203.
Sound emission values determined according to 
EN 60745-2-1.
Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745.
The vibration level given in this information sheet has been 

measured in accordance with a standardised test given in 

EN 60745 and may be used to compare one tool with anoth-

er. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main ap-

plications of the tool. However if the tool is used for different 

applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This 

may significantly increase the exposure level over the total 
working period.

An estimation of the level of exposure to vibration should also 

take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may sig-

nificantly reduce the exposure level over the total working 
period.

Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 

accessories, keep the hands warm, organisation of work pat-

terns.

Audible engagement (multiple)

*

Value dependent of the battery pack 
being used

L

wA

Sound power level

L

pA

Sound pressure level

K

Uncertainty

a

h

Vibration total value

T

1

Permitted ambient temperature during 

charging

T

2

Permitted ambient temperature during 

operation

**

 and storage

(** Limited performance at temperatures 

< 0 ° C)
Recommended batteries

Recommended chargers

Symbol

Meaning

Henk Becker
Executive Vice President
Engineering

Helmut Heinzelmann
Head of Product Certification
PT/ETM9

OBJ_BUCH-2041-002.book  Page 12  Monday, January 12, 2015  10:35 AM