Bosch GSR 14,4-2-LI - Инструкция по эксплуатации - Страница 11

 English | 

11

Bosch Power Tools

1 609 92A 2D7 | (5.10.16)

Delivery Scope

Cordless screwdriver / Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.

A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for driving in and loosening screws 
as well as for drilling in wood, metal, ceramics and plastic. 
GSB machines are additionally intended for impact drilling in 
bricks, brickwork and masonry.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

Technical Data

The technical data of the machine are listed in the table on 
page 163.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation 
1194/2012), 2011/65/EU, until 19 April 2016: 
2004/108/EC, from 20 April 2016 on: 2014/30/EU, 
2006/42/EC including their amendments and complies with 
the following standards: EN 60745-1, EN 60745-2-1, 
EN 60745-2-2, EN 50581.

Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ECS,
70538 Stuttgart, GERMANY

Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017

Noise/Vibration Information

The measured values of the machine are listed in the table on 
page 163.

Sound emission values determined according to EN 60745-2-1.

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745-2-1.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different 
applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This 
may significantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working 
period.
Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Mounting and Operation

Recommended chargers for wireless 
charging batteries

Symbol

Meaning

Henk Becker
Executive Vice President
Engineering and
Manufacturing

Helmut Heinzelmann
Head of Product Certification
PT/ECS

Action

Figure

Page

Removing the battery

1

164

Inserting the battery

2

164

Mounting application tools

3

164

Reversing the rotational direction

4

165

Setting the torque

5

165

Selecting the drilling position

6

166

Setting the operating mode

7

166

Gear selection, mechanical

8

166

Mounting/dismounting the belt clip

9

167

Mounting/dismounting the bit holder

10

167

Switching On and Off

11

167

Selecting Accessories

–

168

OBJ_BUCH-2389-003.book  Page 11  Wednesday, October 5, 2016  8:29 AM