Шуруповерты Bosch GSR 10 8 V EC - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
English |
11
Bosch Power Tools
2 609 141 137 | (4.12.13)
Delivery Scope
Cordless Screwdriver.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.
A complete overview of accessories can be found in our ac-
cessories program.
Intended Use
The machine is intended for driving in and loosening screws
as well as for drilling in wood, metal, ceramics and plastic.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Technical Data
The technical data of the machine are listed in the table on
page 157.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with the fol-
lowing standards or standardisation documents: EN 60745
according to the provisions of the directives 2009/125/EC
(Regulation 1194/2012), 2011/65/EU, 2004/108/EC,
2006/42/EC.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
D-70745 Leinfelden-Echterdingen
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
18.11.2013
Noise/Vibration Information
The measured values of the machine are listed in the table on
page 157.
Noise and vibrational values (vector sum of three directions)
determined according to EN 60745.
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Mounting and Operation
Battery
GSR 10,8 V-EC
GSR 10,8 V-EC HX
Permitted ambient
temperature
–
when charging
–
during operation*
–
during storage
° C
° C
° C
0 ... + 45
– 20 ... + 50
– 20 ... + 60
Recommended
batteries
GBA 10,8 V x.xAh O– .
* Limited performance at temperatures < 0 ° C
Henk Becker
Executive Vice President
Engineering
Helmut Heinzelmann
Head of Product Certification
PT/ETM9
Action
Figure
Page
Removing the battery
1
158
Inserting the battery
2
158
Mounting application tools
3
158 – 159
Reversing the rotational direction
4
159
Setting the torque
5
160
Selecting the drilling position
6
160
Gear selection, mechanical
7
160
Mounting/dismounting the belt hook
8
161
Mounting/dismounting the bit holder
9
161
Mounting/dismounting the belt hook and bit holder
10
161
Mounting/dismounting the colour clip
11
162
OBJ_BUCH-1966-003.book Page 11 Wednesday, December 4, 2013 9:28 AM
