Bosch GSB 18 VE-2-LI - Инструкция по эксплуатации - Страница 11

 English | 

11

Bosch Power Tools

1 609 92A 0WK | (16.10.14)

Delivery Scope

Cordless screwdriver / Combination cordless drill.
Battery, application tools and other accessories shown or de-
scribed are not part of the standard delivery scope.

A complete overview of accessories can be found in our ac-
cessories program.

Intended Use

The machine is intended for driving in and loosening screws 
as well as for drilling in wood, metal, ceramics and plastic. 
GSB machines are additionally intended for impact drilling in 
bricks, brickwork and masonry.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

Technical Data

The technical data of the machine are listed in the table on 
page 158.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2009/125/EC (Regulation 
1194/2012), 2011/65/EU, 2014/30/EU, 2006/42/EC in-
cluding their amendmentsand complies with the following 
standards: EN 60745-1, EN 60745-2-1, EN 60745-2-2.

Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
15.10.2014

Noise/Vibration Information

The measured values of the machine are listed in the table on 
page 158.

Sound emission values determined according to 
EN 60745-2-1.

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determinedaccording to EN 60745.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different 
applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This 
may significantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working 
period.
Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Mounting and Operation

T

1

Permitted ambient temperature during 
charging

T

2

Permitted ambient temperature during 
operation

*

 and storage

* Limited performance at temperatures < 0 ° C

Recommended batteries

Recommended chargers

Recommended chargers for wireless 
charging batteries

Symbol

Meaning

Henk Becker
Executive Vice President
Engineering

Helmut Heinzelmann
Head of Product Certification
PT/ETM9

Action

Figure

Page

Removing the battery

1

159

Inserting the battery

2

159

Checking the battery charge 
condition

3

159

Changing the position of the 
auxiliary handle

4

160

Mounting application tools

5

160

Reversing the rotational direction

6

161

Setting the torque

7

161

Selecting the drilling position

8

162

Setting the operating mode

9

162

Gear selection, mechanical

10

162

Switching On and Off

11

163

Selecting Accessories

–

164

OBJ_DOKU-33412-003.fm  Page 11  Thursday, October 16, 2014  3:25 PM