Bosch GSB 18 VE 2 2 6Ah x1 Case - Инструкция по эксплуатации - Страница 10

10

 | English 

1 609 92A 0WS | (13.10.14)

Bosch Power Tools

Additional Safety and Working 
Instructions



Dusts from materials such as lead-containing coatings, 
some wood types, minerals and metal can be harmful to 
one’s health and cause allergic reactions, lead to res-
piratory infections and/or cancer.

 Materials containing 

asbestos may only be worked by specialists.

–

Provide for good ventilation of the working place.

–

It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-
rials to be worked.



Before any work on the machine (e. g., maintenance, 
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre 
position. 

Unintentional actuation of the On/Off switch can 

lead to injuries.



The battery is supplied partially charged. To ensure full 
battery capacity, completely charge the battery in the 
battery charger before using for the first time.



Read the operating instructions of the battery charger.



Apply the power tool to the screw only when it is 
switched off. 

Rotating tool inserts can slip off.



Adjust the gear switch only when the machine is at a 
complete stop.



Always push the gear selector and turn the operating 
mode selector switch through to the stop. 

Otherwise, 

the machine can become damaged.



In case of excessive loading, e. g., prolonged blocking 
of the application tool, the electronics switch off the 
power tool. After switching on again, the power tool 
can be used again as intended for. In case of continued 
overload, the power tool will switch off again in order 
to prevent damage to the motor.

To save energy, only switch the power tool on when using it.



Before performing any work, make sure that the auxil-
iary handle is firmly tightened. 

Loss of control can lead 

to injury.

Rapid Shut-off



The rapid shut-off feature enables better control of the 
power tool. The power tool shuts off in case of sudden and 
unexpected rotation of the power tool around the drilling 
axis.



The rapid shut-off feature is indicated by a flashing LED on 
the power tool.



To 

restart the machine

, release the On/Off switch and 

then actuate again.



Rapid shut-off can trigger only when the power tool is 
running at maximum operating speed and can rotate 
freely around the drill bit axis. 

Choose a suitable work 

position for this. Otherwise, rapid shut-off will not be en-
sured.

Symbols

The following symbols are important for reading and under-
standing the operating instructions. Please take note of the 
symbols and their meaning. The correct interpretation of the 
symbols will help you to use the machine in a better and safer 
manner.

Symbol

Meaning

GSR 14,4 VE-2-LI /
GSR 18 VE-2-LI /
GSB 14,4 VE-2-LI /
GSB 18 VE-2-LI: Cordless screwdriver /
Combination cordless drill

Grey-marked area: Handle (insulated 
gripping surface)

Article number

Read all safety warnings and all
instructions

Before any work on the machine itself, 
remove the battery

Always wear ear protection

Movement direction

Reaction direction

Drilling and screwdriving

Impact drilling

Low speed

High speed

Switching On

Switching Off

Prohibited action

OBJ_BUCH-1982-002.book  Page 10  Monday, October 13, 2014  2:33 PM