Bosch GSB 18-2-LI - Инструкция по эксплуатации - Страница 9

 English | 

9

Bosch Power Tools

1 609 92A 0WL | (30.9.14)



Maintain power tools. Check for misalignment or bind-
ing of moving parts, breakage of parts and any other 
condition that may affect the power tool’s operation. If 
damaged, have the power tool repaired before use. 

Many accidents are caused by poorly maintained power 
tools.



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Battery tool use and care



Recharge only with the charger specified by the manu-
facturer. 

A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another bat-
tery pack.



Use power tools only with specifically designated bat-
tery packs. 

Use of any other battery packs may create a 

risk of injury and fire.



When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. 

Liquid ejected from the battery 

may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Drills and Screw-
drivers

GSB 14,4 V-LI / GSB 18 V-LI



Wear ear protectors when impact drilling. 

Exposure to 

noise can cause hearing loss.

GSR 14,4 V-LI / GSR 18 V-LI / 
GSB 14,4 V-LI / GSB 18 V-LI



Hold power tool by insulated gripping surfaces when 
performing an operation where the cutting accessory 
or fastener may contact hidden wiring. 

Cutting accesso-

ry and fasteners contacting a “live” wire may make ex-
posed metal parts of the power tool “live” and could give 
the operator an electric shock.



Use auxiliary handle(s), if supplied with the tool. 

Loss 

of control can cause personal injury.



Use appropriate detectors to determine if utility lines are 
hidden in the work area or call the local utility company 
for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-
sion. Penetrating a water line causes property damage.



Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that 
can cause kickback. 

The tool insert jams when:

— the power tool is subject to overload or
— it becomes wedged in the workpiece.



Hold the machine with a firm grip. 

High reaction torque 

can briefly occur while driving in and loosening screws.



When working with the machine, always hold it firmly 
with both hands and provide for a secure stance. 

The 

power tool is guided more secure with both hands.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and 
moisture. 

Danger of explosion.



In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
power tool. 

This measure alone protects the battery 

against dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.

Additional Safety and Working 
Instructions



Dusts from materials such as lead-containing coatings, 
some wood types, minerals and metal can be harmful to 
one’s health and cause allergic reactions, lead to res-
piratory infections and/or cancer.

 Materials containing 

asbestos may only be worked by specialists.

–

Provide for good ventilation of the working place.

–

It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-
rials to be worked.



Prevent dust accumulation at the workplace. 

Dusts can 

easily ignite.



Before any work on the machine (e. g., maintenance, 
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the centre 
position. 

Unintentional actuation of the On/Off switch can 

lead to injuries.

OBJ_BUCH-1227-007.book  Page 9  Tuesday, September 30, 2014  1:39 PM