Bosch GSB 16 RE + оснастки 0615990L2N - Инструкция по эксплуатации - Страница 15

English | 

15

the left-hand side and upwards on the right-hand side at the
same time.

Setting the Operating Mode

Drilling and screwdriving

Set the selector switch 

(2)

 to the "drilling"

symbol.

Impact drilling

Set the selector switch 

(2)

 to the "impact

drilling" symbol.
The selector switch 

(2)

 clicks into place and

can also be actuated when the motor is running.

Switching on/off

To 

start

 the power tool, press and hold the on/off switch

(5)

.

Press the lock-on button 

(4)

 to 

lock

 the on/off switch 

(5)

 in

this position.
To 

switch off

 the power tool, release the on/off switch 

(5)

;

or, if the switch is locked with the lock-on button 

(4)

, briefly

press the on/off switch 

(5)

 and then release it.

Adjusting the Speed/Impact Rate

You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch 

(5)

 to varying ex-

tents.
Applying light pressure to the on/off switch 

(5)

 results in a

low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.

Preselecting the speed/impact rate

You can preselect the required speed/impact rate using the
speed preselection thumbwheel 

(6)

, even during operation.

The required speed/impact rate is dependent on the mater-
ial and the work conditions and can be determined by prac-
tical trials.

Practical Advice

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

Only apply the power tool to the screw/nut when the
tool is switched off.

 Rotating tool inserts can slip off.

After working at a low speed for an extended period, you
should operate the power tool at the maximum speed for ap-
proximately three minutes without load to cool it down.
To drill into tiles, set the selector switch 

(2)

 to the "drilling"

symbol. After drilling through the tile, set the selector switch
to the "impact drilling" symbol and drill with impact.
Use carbide drill bits when working with concrete, stone and
masonry.
When drilling into metal, only use sharpened HSS drills (HSS
= high-speed steel) which are in perfect condition. The

Bosch

 accessory range guarantees appropriate quality.

Using the drill bit sharpener (accessory), you can effortlessly
sharpen twist drill bits with a diameter of 2.5–10 mm.
Use a drill stand (accessory) for jobs that require particular
precision.

The machine vice, which is available as an accessory, en-
ables the workpiece to be securely clamped. This prevents
the workpiece from turning and any accidents this could
cause.

Maintenance and Service

Maintenance and Cleaning

u

Pull the plug out of the socket before carrying out any
work on the power tool.

u

To ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by 

Bosch

 or by an

after-sales service centre that is authorised to repair 

Bosch

power tools.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: 

www.bosch-pt.com

The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.

Australia, New Zealand and Pacific Islands

Robert Bosch Australia Pty. Ltd.
Power Tools 
Locked Bag 66 
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ: 
Phone: +61 3 95415555 
www.bosch-pt.com.au
www.bosch-pt.co.nz

Great Britain

Robert Bosch Ltd. (B.S.C.) 
P.O. Box 98 
Broadwater Park 
North Orbital Road 
Denham Uxbridge
UB 9 5HJ 
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair. 
Tel. Service: (0344) 7360109 
E-Mail: boschservicecentre@bosch.com

Bosch Power Tools

1 609 92A 5B6 | (05.08.2019)