Bosch GSB 16 RE 0.601.14E.600 - Инструкция по эксплуатации - Страница 22

 English | 

21

Bosch Power Tools

1 609 929 R66 | (10.7.08)

Working Advice

f

Apply the power tool to the screw/nut only 
when it is switched off. 

Rotating tool inserts 

can slip off.

After longer periods of working at low speed, al-
low the machine to cool down by running it for 
approx. 3 minutes at maximum speed with no 
load.
For drilling in tiles, set the selector switch 

2

 to 

the “Drilling” symbol. Do not switch over to the 
symbol “Impact Drilling” or work with impact 
until after drilling through the tile.
Use carbide tipped drill bits when working in 
concrete, masonry and brick wall.
For drilling in metal, use only perfectly sharp-
ened HSS drill bits (HSS = high-speed steel). The 
appropriate quality is guaranteed by the Bosch 
accessories program.
Twist drills from 2,5 – 10 mm can easily be 
sharpened with the drill bit sharpener (see ac-
cessories).
We recommend the use of a drill stand (see ac-
cessories) for work where greater precision is 
particularly required.
The machine vice, which is available as an acces-
sory, enables secure clamping of workpieces. 
This prevents the workpiece from turning and 
any accidents this would cause.

Maintenance and Service

Maintenance and Cleaning

f

Before any work on the machine itself, pull 
the mains plug.

f

For safe and proper working, always keep 
the machine and ventilation slots clean.

If the machine should fail despite the care taken 
in manufacturing and testing procedures, repair 
should be carried out by an after-sales service 
centre for Bosch power tools.
In all correspondence and spare parts order, 
please always include the 10-digit article 
number given on the type plate of the machine.

WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.

The wires in the cable are coloured according to 
the following code:

Do 

not

 connect the blue or brown wire to the 

earth terminal of the plug.

Important:

 If for any reason the moulded plug is 

removed from the cable of this power tool, it 
must be disposed of safely.

After-sales Service and Customer 

Assistance

Our after-sales service responds to your ques-
tions concerning maintenance and repair of your 
product as well as spare parts. Exploded views 
and information on spare parts can also be 
found under:

www.bosch-pt.com

Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com

Ireland

Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88

OBJ_BUCH-806-001.book  Page 21  Thursday, July 10, 2008  12:35 PM