Шуруповерты Bosch GSB 14.4-2-LI 0.601.9A5.400 - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.
Если остались вопросы, задайте их в комментариях после инструкции.
"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
12
| English
2 609 140 717 | (21.12.09)
Bosch Power Tools
f
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire
and electric shock. Damaging a gas line can
lead to explosion. Penetrating a water line
causes property damage or may cause an
electric shock.
f
Switch off the power tool immediately
when the tool insert jams. Be prepared for
high reaction torque that can cause kick-
back.
The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
f
Hold the machine with a firm grip.
High re-
action torque can briefly occur while driving
in and loosening screws.
f
Secure the workpiece.
A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
f
Keep your workplace clean.
Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
f
Do not open the battery.
Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture.
Danger of
explosion.
f
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints.
The vapours can irritate the
respiratory system.
f
Use the battery only in conjunction with
your Bosch power tool.
This measure alone
protects the battery against dangerous over-
load.
f
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool.
When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.
Additional Safety and Working
Instructions
f
Dusts from materials such as lead-contain-
ing coatings, some wood types, minerals
and metal can be harmful to one’s health
and cause allergic reactions, lead to respi-
ratory infections and/or cancer.
Materials
containing asbestos may only be worked by
specialists.
– Provide for good ventilation of the work-
ing place.
– It is recommended to wear a P2 filter-
class respirator.
Observe the relevant regulations in your
country for the materials to be worked.
f
Before any work on the machine (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rota-
tional direction switch to the centre posi-
tion.
Unintentional actuation of the On/Off
switch can lead to injuries.
f
The battery is supplied partially charged.
To ensure full battery capacity, completely
charge the battery in the battery charger
before using for the first time.
f
Read the operating instructions of the bat-
tery charger.
f
Apply the power tool to the screw only
when it is switched off.
Rotating tool inserts
can slip off.
f
Adjust the gear switch only when the ma-
chine is at a complete stop.
f
If the gear switch cannot be pushed to the
stop, turn the drill chuck a little.
OBJ_BUCH-1116-001.book Page 12 Monday, December 21, 2009 2:19 PM
