Bosch GDR 12V-110 0.601.9E0.005 - Инструкция по эксплуатации - Страница 13

 English | 

13

Bosch Power Tools

1 609 92A 29D | (20.7.16)



Keep cutting tools sharp and clean. 

Properly maintained 

cutting tools with sharp cutting edges are less likely to bind 
and are easier to control.



Use the power tool, accessories and tool bits etc. in ac-
cordance with these instructions, taking into account 
the working conditions and the work to be performed. 

Use of the power tool for operations different from those 
intended could result in a hazardous situation.

Battery tool use and care



Recharge only with the charger specified by the manu-
facturer. 

A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another bat-
tery pack.



Use power tools only with specifically designated bat-
tery packs. 

Use of any other battery packs may create a 

risk of injury and fire.



When battery pack is not in use, keep it away from oth-
er metal objects, like paper clips, coins, keys, nails, 
screws or other small metal objects, that can make a 
connection from one terminal to another. 

Shorting the 

battery terminals together may cause burns or a fire.



Under abusive conditions, liquid may be ejected from 
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addition-
ally seek medical help. 

Liquid ejected from the battery 

may cause irritation or burns.

Service



Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. 

This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Impact Wrenches



Hold power tool by insulated gripping surfaces, when 
performing an operation where the fastener may con-
tact hidden wiring. 

Fasteners contacting a “live” wire may 

make exposed metal parts of the power tool “live” and 
could give the operator an electric shock.



Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.



Always wait until the machine has come to a complete 
stop before placing it down. 

The tool insert can jam and 

lead to loss of control over the power tool.



Do not open the battery. 

Danger of short-circuiting.

Protect the battery against heat, e. g., against 
continuous intense sunlight, fire, water, and 
moisture. 

Danger of explosion.



In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek 
medical help in case of complaints. 

The vapours can irri-

tate the respiratory system.



Use the battery only in conjunction with your Bosch 
product. 

This measure alone protects the battery against 

dangerous overload.



The battery can be damaged by pointed objects such as 
nails or screwdrivers or by force applied externally. 

An 

internal short circuit can occur and the battery can burn, 
smoke, explode or overheat.

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for driving in and loosening screws 
and bolts as well as for tightening and loosening nuts within 
the respective range of dimension.

The light of this power tool is intended to illuminate the power 
tool’s direct area of working operation and is not suitable for 
household room illumination.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Tool holder

2

Locking sleeve

3

“PowerLight”

4

“PowerLight” button

5

Speed indication

6

Button for electronic speed preselection

7

Battery unlocking button

8

Battery pack

9

Rotational direction switch

10

On/Off switch

11

Battery charge-control indicator

12

Handle (insulated gripping surface)

13

Double bit *

14

Universal bit holder *

15

Screwdriver bit *

16

Application tool (e. g. an impact socket) *

17

Belt clip *

18

Colour clip *

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

OBJ_BUCH-2928-001.book  Page 13  Wednesday, July 20, 2016  1:58 PM