BAB-18Ix2Li-FD 2×1.5А.ч 91275998 - Инструкция по эксплуатации - Страница 8

8

•  If operating a power tool in a damp location is unavoid-

able, use a residual current device (RCD) protected sup-

ply . Use of an RCD reduces the risk of electric shock .

Personal safety

•  Stay alert, watch what you are doing and use common 

sense when operating a power tool . Do not use a power 

tool while you are tired or under the influence of drugs, 

alcohol or medication . A moment of inattention while 

operating power tools may result in serious personal 

injury .

•  Use personal protective equipment . Always wear eye 

protection . Protective equipment such as dust mask, 

non-skid safety shoes, hard hat, or hearing protection 

used for appropriate conditions will reduce personal 

injuries .

•  Prevent unintentional starting . Ensure the switch is in 

the off-position before connecting to power source and/

or battery pack, picking up or carrying the tool . Carrying 

power tools with your finger on the switch or energising 

power tools that have the switch on invites accidents .

•  Remove any adjusting key or wrench before turning the 

power tool on . A wrench or a key left attached to a rotat-

ing part of the power tool may result in personal injury .

•  Do not overreach . Keep proper footing and balance at 

all times . This enables better control of the power tool in 

unexpected situations .

•  Dress properly . Do not wear loose clothing or jewellery . 

Keep your hair, clothing and gloves away from mov-

ing parts . Loose clothes, jewellery or long hair can be 

caught in moving parts .

•  If devices are provided for the connection of dust extrac-

tion and collection facilities, ensure these are connected 

and properly used . Use of dust collection can reduce 

dust-related hazards .

Power tool use and care

•  Do not force the power tool . Use the correct power 

tool for your application . The correct power tool will 

do the job better and safer at the rate for which it was 

designed .

•  Do not use the power tool if the switch does not turn 

it on and off . Any power tool that cannot be controlled 

with the switch is dangerous and must be repaired .

•  Disconnect the plug from the power source and/or the 

battery pack from the power tool before making any 

adjustments, changing accessories, or storing power 

tools . Such preventive safety measures reduce the risk of 

starting the power tool accidentally .

•  Store idle power tools out of the reach of children and 

do not allow persons unfamiliar with the power tool 

or these instructions to operate the power tool . Power 

tools are dangerous in the hands of untrained users .

•  Maintain power tools . Check for misalignment or bind-

ing of moving parts, breakage of parts and any other 

condition that may affect the power tool’s operation . 

If damaged, have the power tool repaired before use . 

Many accidents are caused by poorly maintained power 

tools .

•  Keep cutting tools sharp and clean . Properly maintained 

cutting tools with sharp cutting edges are less likely to 

bind and are easier to control .

•  Use the power tool, accessories and tool bits etc . in 

accordance with these instructions, taking into account 

the working conditions and the work to be performed . 

Use of the power tool for operations different from 

those intended could result in a hazardous situation .

Battery tool use and care

•  Recharge only with the charger specified by the manu-

facturer . A charger that is suitable for one type of battery 

pack may create a risk of fire when used with another 

battery pack .

•  Use power tools only with specifically designated bat-

tery packs . Use of any other battery packs may create a 

risk of injury and fire .

•  When battery pack is not in use, keep it away from other 

metal objects, like paper clips, coins, keys, nails, screws 

or other small metal objects, that can make a connec-

tion from one terminal to another . Shorting the battery 

terminals together may cause burns or a fire .

•  Under abusive conditions, liquid may be ejected from 

the battery; avoid contact . If contact accidentally occurs, 

flush with water . If liquid contacts eyes, additionally seek 

medical help . Liquid ejected from the battery may cause 

irritation or burns .

Service

Have your power tool serviced by a qualified repair person 

using only identical replacement parts . This will ensure 

that the safety of the power tool is maintained .

SAFETY WARNINGS FOR SCREWDRIVERS

•  Use auxiliary handle(s), if supplied with the tool . Loss of 

control can cause personal injury .

•  Hold power tool by insulated gripping surfaces, when 

performing an operation where the cutting accessory 

may contact hidden wiring or its own cord . Cutting 

accessory contacting a “live” wire may make exposed 

metal parts of the power tool “live” and could give the 

operator an electric shock .

•  Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance . Contact with electric lines can lead to 

fire and electric shock . Damaging a gas line can lead 

to explosion . Penetrating a water line causes property 

damage or may cause an electric shock .

•  Switch off the power tool immediately when the tool 

insert jams . Be prepared for high reaction torque that 

can cause kickback . The tool insert jams when: 

– the power tool is subject to overload 

– it becomes wedged in the workpiece .

•  Hold the machine with a firm grip . High reaction torque 

can briefly occur while driving in and loosening screws .

•  When working with the machine, always hold it firmly 

with both hands and provide for a secure stance . The 

power tool is guided more secure with both hands .

•  Secure the workpiece . A workpiece clamped with 

clamping devices or in a vice is held more secure than 

by hand .

•  Do not open the battery . Danger of short-circuiting .

•  Protect the battery against heat, e . g ., against continu-

ous intense sunlight, fire, water, and moisture . Danger 

of explosion .