Ryobi RROS18-0 (5133005393) - Инструкция по эксплуатации - Страница 3

Safety, performance, and dependability have been given 
top priority in the design of your random orbital sander.

INTENDED USE

The random orbital sander is intended to be used only by 
adults who have read and understood the instructions and 
warnings in this manual, and can be considered responsible 
for their actions.
The product is intended for sanding and 

fi

 nishing  metal, 

wood, plastics, or similar materials using the abrasive pads 
provided.
The product should only be used in well-ventilated areas.
The product is designed for dry sanding only. Do not use 
for wet sanding.
The product is intended for consumer use only.
Do not use the product for any other purpose. Use of the 
product for operations different from intended could result in 
a hazardous situation.

WARNING!

Read all safety warnings, instructions, 

illustrations and specifications provided with this 
power tool.

 Failure to follow all instructions listed below 

may result in electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference.

RANDOM ORBITAL SANDER SAFETY WARNINGS

■

Clamp workpiece with a clamping device. Unclamped 
workpieces can cause severe injury and damage.

Do 

not hold the material you are sanding by hand.

■

Do not use sanding paper larger than needed. 

Extra 

paper extending beyond the sanding pad can also cause 
serious lacerations.

■

Ambient temperature range for tool during operation is 
between 

0

°C and 

40

°C.

■

Ambient temperature range for tool storage is between 

0

°C and 

40

°C.

■

The recommended ambient temperature range for the 
charging system during charging is between 

10

°C and 

38

°C.

ADDITIONAL BATTERY SAFETY WARNINGS

■

To reduce the risk of fire, personal injury, and product 
damage due to a short circuit, never immerse your 
tool, battery pack or charger in fluid or allow fluid to 
flow inside them. Corrosive or conductive fluids, such 
as seawater, certain industrial chemicals, and bleach 
or bleach-containing products, etc., can cause a short 
circuit.

■

Ambient temperature range for battery during use is 
between 

0

°C and 

40

°C.

■

Ambient temperature range for battery storage is 
between 

0

°C and 

20

°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 
provisions and regulations.
Follow all special requirements on packaging and labelling 
when transporting batteries by a third party. Ensure that 
no batteries can come in contact with other batteries 
or conductive materials while in transport by protecting 
exposed connectors with insulating, non-conductive caps or 
tape. Do not transport batteries that are cracked or leaking. 
Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

See page 57.

1. Battery port
2.  Insulated grasping surface
3.  On / Off switch
4. Dust port
5.  Quick change hook-and-loop pad
6. Sandpaper
7. Dust bag
8. Operator’s manual
9. Battery pack
10. Charger

MAINTENANCE

■

The product should never be connected to a power 
supply when assembling parts, making adjustments, 
cleaning, performing maintenance, or when the product 
is not in use. Disconnecting the product from the power 
supply will prevent accidental starting that could cause 
serious injury.

■

When servicing, use only original manufacturer’s 
replacement parts, accessories and attachments. Use 
of any other parts may create a hazard or cause product 
damage.

■

Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to various types of commercial 
solvents and may be damaged by their use. Use clean 
cloths to remove dirt, carbon dust, etc.

■

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with plastic parts. Chemicals can damage, weaken or 
destroy plastic which may result in serious personal 
injury.

■

For greater safety and reliability, all repairs should be 
performed by an authorised service centre.

SYMBOLS ON THE PRODUCT

Safety alert

No-load speed

On

Off

Please read the instructions carefully 
before starting the machine.

European Conformity Mark

British Conformity Mark

Ukraine Conformity Mark

EurAsian Conformity Mark

ENGLISH

EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL

3

Original Instructions