Ryobi RMS180-S - Инструкция по эксплуатации - Страница 3

1

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

Safety, performance, and dependability have been given 
top priority in the design of your multi-pad sander.

INTENDED USE

The multi-pad sander is intended for sanding and 

fi

 nishing 

metal, wood, plastic or similar materials using the abrasive 
pads or sheets provided. The multi-pad sander is intended 
to be used by adult operators who have read the instruction 
manual and understand the risks and hazards. The multi-
pad sander should only be used in well ventilated areas. 
The multi-pad sander is designed for dry sanding only.
The multi-pad sander is intended only for consumer use.
Do not use the product in any way other than those stated 
in intended use. Use of the product for operations different 
from intended could result in a hazardous situation.

 WARNING

Read all safety warnings and all instructions.

 Failure 

to follow the warnings and instructions may result in 
electric shock, 

fi

 re and/or serious injury.

Save all warnings and instructions for future reference

.

SANDER SAFETY WARNINGS

■

Always wear safety goggles and a dust mask

 when 

sanding, especially sanding over-head.

■

The machine is not suitable for wet sanding.

■

Do not use sanding paper larger than needed.

 Extra 

paper extending beyond the sanding pad can also 
cause serious lacerations.

■

The dust collection box shall be equipped with the 
tool. 

It should be emptied frequently. To connect dust 

collection box, insert the adapter of dust box to the dust-
collection opening on the rear end of the sander.

 WARNING

Do not throw sanding dust into an open fire because 
materials in fine particle form may be explosive.

 WARNING

A suitable breathing respirator must be worn while 
sanding lead paint, some woods and metal to avoid 
breathing the harmful/toxic dust or air.

 WARNING

Dust from certain paints, coatings, and materials may 
cause irritation or allergic reactions. Dust from wood, 
such as oak, beech, MDF, and others are carcinogenic. 
Materials containing asbestos should only be worked on 
or processed by quali

fi

 ed specialist operators.

RESIDUAL RISKS

Even when the product is used as prescribed, it is still 
impossible to completely eliminate certain residual risk 

factors. The following hazards may arise and the operator 
should pay special attention to avoid the following:

■

Injury caused by dust

–

Using the product will produce considerable amount 
of dust and fine particles. Use the dust collection 
device or connect a dust extraction vacuum when 
operating the product. Wear dust masks containing 
filters appropriate to the materials being worked on. 
Ensure adequate workplace ventilation. Do not eat, 
drink, or smoke in the work area.

■

Injury caused by noise and vibration

–

Wear ear protection during the sanding operation. 
Do not operate the product for long periods of time. 
See “Risk reduction”.

RISK REDUCTION

It has been reported that vibrations from handheld tools 
may contribute to a condition called Raynaud’s Syndrome 
in certain individuals. Symptoms may include tingling, 
numbness and blanching of the 

fi

 ngers, usually apparent 

upon exposure to cold. Hereditary factors, exposure to 
cold and dampness, diet, smoking and work practices 
are all thought to contribute to the development of these 
symptoms. There are measures that can be taken by the 
operator to possibly reduce the effects of vibration:

■

Keep your body warm in cold weather. When operating 
the unit wear gloves to keep the hands and wrists 
warm. It is reported that cold weather is a major factor 
contributing to Raynaud’s Syndrome.

■

After each period of operation, exercise to increase 
blood circulation.

■

Take frequent work breaks. Limit the amount of 
exposure per day.

If you experience any of the symptoms of this condition, 
immediately discontinue use and see your doctor about 
these symptoms.

 WARNING

Injuries may be caused or aggravated by prolonged use 
of a tool. When using any tool for prolonged periods, 
ensure you take regular breaks.

KNOW YOUR PRODUCT

See page 91.

1. Turn off
2.  Variable speed control selector
3. Turn on
4. Cover
5. Finger pad
6. Lock
7.  Dust collection box
8. Delta pad
9. Paper Clamp
10. 1/3 Sheet pad
11. Hex key
12. Adhesive sandpaper
13. Non-adhesive sandpaper