Ryobi (5133002852) - Инструкция по эксплуатации - Страница 3

1

 English 

|

EN

FR

DE

ES

IT

NL

PT

DA

SV

FI

NO

RU

PL

CS

HU

RO

LV

LT

ET

HR

SL

SK

BG

UK

TR

EL

Safety, performance, and dependability have been given 

top priority in the design of your cordless angle grinder.

INTENDED USE

The angle grinder is intended to be used only by adults who 

have read and understood the instructions and warnings 

in this manual and can be considered responsible for their 

actions. The angle grinder is designed for grinding and 

cutting metals only. Only appropriate grinding discs as 

described in the product specification section of this manual 

should be fitted to the angle grinder. The angle grinder is 

designed for handheld use; it is not to be mounted onto a 

fixture or workbench.
Do not use the product in any way other than those stated 

for intended use.

 WARNING

Read all safety warnings and all instructions.

 Failure 

to follow the warnings and instructions may result in 

electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference

.

ANGLE GRINDER SAFETY WARNINGS

SAFETY WARNINGS COMMON FOR GRINDING AND 
ABRASIVE CUTTING-OFF OPERATIONS

■

This power tool is intended to function as a 

grinder and cut-off tool. Read all safety warnings, 

instructions, illustrations and specifications 

provided with this power tool.

 Failure to follow all 

instructions listed below may result in electric shock, 

fire and/or serious injury.

■

Operations such as sanding, wire brushing or 

polishing are not recommended to be performed 

with this power tool.

 Operations for which the power 

tool was not designed may create a hazard and cause 

personal injury.

■

Do not use accessories which are not specifically 

designed and recommended by the tool 

manufacturer.

 Just because the accessory can be 

attached to your power tool, it does not assure safe 

operation.

■

The rated speed of the accessory must be at least 

equal to the maximum speed marked on the power 

tool.

 Accessories running faster than their rated speed 

can break and fly apart.

■

The outside diameter and the thickness of your 

accessory must be within the capacity rating of 

your power tool.

 Incorrectly sized accessories cannot 

be adequately guarded or controlled.

■

Threaded mounting of accessories must match the 

grinder spindle thread. For accessories mounted 

by flanges, the arbour hole of the accessory must 

fit the locating diameter of the flange.

 Accessories 

that to do not match the mounting hardware of the 

power tool will run out of balance, vibrate excessively 

and may cause loss of control.

■

Do not use a damaged accessory. Before each use 

inspect the accessory such as abrasive wheels for 

chips and cracks, backing pad for cracks, tear or 

excess wear, wire brush for loose or cracked wires. 

If power tool or accessory is dropped, inspect for 

damage or install an undamaged accessory. After 

inspecting and installing an accessory, position 

yourself and bystanders away from the plane of 

the rotating accessory and run the power tool at 

maximum no-load speed for one minute.

 Damaged 

accessories will normally break apart during this test 

time.

■

Wear personal protective equipment.  Depending 

on application, use face shield, safety goggles or 

safety glasses. As appropriate, wear dust mask, 

hearing protectors, gloves and workshop apron 

capable of stopping small abrasive or workpiece 

fragments.

 The eye protection must be capable of 

stopping flying debris generated by various operations. 

The dust mask or respirator must be capable of filtrating 

particles generated by your operation. Prolonged 

exposure to high intensity noise may cause hearing 

loss.

■

Keep bystanders a safe distance away from work 

area. Anyone entering the work area must wear 

personal protective equipment.

 Fragments of 

workpiece or of a broken accessory may fly away and 

cause injury beyond immediate area of operation.

■

Hold the power tool by insulated gripping surfaces 

only, when performing an operation where the 

cutting accessory may contact hidden wiring.

Cutting accessory contacting a “live” wire may make 

exposed metal parts of the power tool “live” and could 

give the operator an electric shock.

■

Never lay the power tool down until the accessory 

has come to a complete stop.

 The spinning accessory 

may grab the surface and pull the power tool out of your 

control.

■

Do not run the power tool while carrying it at your 

side.

 Accidental contact with the spinning accessory 

could snag your clothing, pulling the accessory into 

your body.

■

Regularly clean the power tool’s air vents.

 The 

motor’s fan will draw the dust inside the housing and 

excessive accumulation of powdered metal may cause 

electrical hazards.

■

Do not operate the power tool near flammable 

materials.

 Sparks could ignite these materials.

■

Do not use accessories that require liquid coolants.

Using water or other liquid coolants may result in 

electrocution or shock.

FURTHER SAFETY INSTRUCTIONS FOR ALL OPERA-
TIONS
Kickback and related warnings

Kickback is a sudden reaction to a pinched or snagged 

rotating wheel, backing pad, brush or any other accessory. 

Pinching or snagging causes rapid stalling of the rotating 

accessory which in turn causes the uncontrolled power tool 

to be forced in the direction opposite of the accessory’s 

rotation at the point of binding.
For example, if an abrasive wheel is snagged or pinched 

by the workpiece, the edge of the wheel that is entering 

into the pinch point can dig into the surface of the material 

causing the wheel to climb out or kick out. The wheel may 

either jump toward or away from the operator, depending 

on the direction of the wheel’s movement at the point of 

pinching. Abrasive wheels may also break under these 

conditions.
Kickback is the result of power tool misuse and/or incorrect