Makita GA5034 - Инструкция по эксплуатации - Страница 11

11 

WARNING: 

• 

When using an abrasive cut-off / diamond wheel, 
be sure to use only the special wheel guard 
designed for use with cut-off wheels. (In European 
countries, when using a diamond wheel, the 
ordinary guard can be used.) 

• 

NEVER use cut-off wheel for side grinding. 

• 

Do not "jam" the wheel or apply excessive 
pressure.  Do not attempt to make an excessive 
depth of cut.  Overstressing the wheel increases 
the loading and susceptibility to twisting or binding 
of the wheel in the cut and the possibility of 
kickback, wheel breakage and overheating of the 
motor may occur. 

• 

Do not start the cutting operation in the workpiece.   
Let the wheel reach full speed and carefully enter 
into the cut moving the tool forward over the 
workpiece surface.    The wheel may bind, walk up 
or kickback if the power tool is started in the 
workpiece. 

• 

During cutting operations, never change the angle 
of the wheel. Placing side pressure on the cut-off 
wheel (as in grinding) will cause the wheel to crack 
and break, causing serious personal injury. 

• 

A diamond wheel shall be operated perpendicular 
to the material being cut. 

MAINTENANCE 

CAUTION: 

• 

Always be sure that the tool is switched off and 
unplugged before attempting to perform inspection 
or maintenance. 

• 

Never use gasoline, benzine, thinner, alcohol or 
the like. Discoloration, deformation or cracks may 
result. 

1

2

010696 

The tool and its air vents have to be kept clean. 
Regularly clean the tool's air vents or whenever the 
vents start to become obstructed. 
To maintain product SAFETY and RELIABILITY, repairs, 
carbon brush inspection and replacement, any other 
maintenance or adjustment should be performed by 
Makita Authorized Service Centers, always using Makita 
replacement parts. 

OPTIONAL ACCESSORIES 

CAUTION: 

• 

These accessories or attachments are 
recommended for use with your Makita tool 
specified in this manual. The use of any other 
accessories or attachments might present a risk of 
injury to persons. Only use accessory or 
attachment for its stated purpose. 

If you need any assistance for more details regarding 
these accessories, ask your local Makita Service Center. 

• 

Wheel guard (Wheel cover) For depressed center 
wheel / Multi disc 

• 

Wheel guard (Wheel cover) For abrasive cut-off 
wheel / diamond wheel 

• 

Depressed center wheels 

• 

Abrasive cut-off wheel 

• 

Multi discs 

• 

Diamond wheels 

• 

Wire cup brushes 

• 

Wire bevel brush 85 

• 

Abrasive discs 

• 

Inner flange 

• 

Lock nut    (For depressed center wheel / abrasive 
cut-off wheel / multi disc / diamond wheel) 

• 

Lock nut    (For abrasive disc) 

• 

Lock nut wrench 

• 

Side grip 

NOTE: 

• 

Some items in the list may be included in the tool 
package as standard accessories. They may differ 
from country to country. 

1. Exhaust vent 
2. Inhalation vent