Defort DCP-150A - Инструкция по эксплуатации - Страница 6

6

Important! To prevent damage and the risk of fi re, 
electrocution or injury, please read and observe 
the following safety instructions before using the 
polishing machine.

1. Safety instructions

••   Use the polishing machine only in a clean and 

dry environment.

••   The polishing machine should be placed on the 

polishing surface before being switched on or 
off .

••   Keep children away by taking the appropriate 

pre cautions.

••  Avoid switching on the machine inadvertently.
••   Do not keep your fi nger on the switch when 

carrying the connected polishing machine from 
one place to another.

••   Always unplug at the mains before changing 

the polishing cap or carrying out repairs.

••   Never carry or pull the machine by its power 

cable.

••  Protect the cable from heat, oil and sharp edges.
••  Check the cable for breaks before each use.
••   Do not exert too much pressure when polish-

ing, but simply allow the polishing machine to 
glide over the polishing surface.

••  Check the housing and switch for damage.
••   Do not use the polishing machine if the housing 

or switch is defective.

2. Maintenance and care

•

Wash the polishing cap only by hand and hang up 
to dry.

•

When not in use, remove the polishing cap and 
store the polishing machine upside down so that 
the polishing pad can dry and retains its original 
shape.

•

The excessive use of wax and paste can cause the 
polishing cap to jump off  the polishing pad while 
polishing.

•

Use only a mild soap and damp cloth to clean the 
polishing cap.

Important! Do not use any abrasive polishing 
agents!

3. Care tips

•

 For optimum paintwork protection, you should 
polish your car 2 to 3 times a year.

•

 Wash your car at least every 2 weeks. Avoid us-
ing household detergents as these can damage 
the paintwork and remove the layer of wax.

•

 Wash your car with a clean sponge, working 
from top to bottom.

•

 Remove all insects, bird droppings and tar stains 
from the paintwork daily.

•

 If you use any window-cleaning agents, spray 
them onto a cloth and not directly onto the 
windows in order to prevent them wetting the 
paintwork.

4. Technical data

Power input: 

12 V

No-load speed: 

3300 min

-1

Disc diameter: 

150 mm

Weight: 1,30 

kg

5. Instructions for use

When using wax and polishes, please observe the 
manufacturers’ instructions.

Pull the textile polishing cap over the polishing 
pad. Make sure the polishing cap is completely 
clean.

Spread the polishing paste evenly over the pol-
ishing pad. Do not apply the polish directly to the 
polishing surface

Switch the polishing machine on and off  only 
when the polishing machine is resting on the 
polishing surface.

Place the extension lead over your shoulder and 
work fi rst on the large, fl at surfaces such as the 
bonnet, boot lid and roof, keeping your move-
ments as regular as possible.

Important! Allow the polishing machine to glide 
over the polishing surface. Do not exert pressure!