Bosch GWS 15-125 CIEH - Инструкция по эксплуатации - Страница 18

 English | 

19

Bosch Power Tools

1 609 92A 16W | (12.2.15)

Product Description and Specifica-
tions

Read all safety warnings and all instruc-
tions. 

Failure to follow the warnings and in-

structions may result in electric shock, fire 
and/or serious injury.

While reading the operating instructions, unfold the graphics 
page for the machine and leave it open.

Intended Use

The machine is intended for cutting, roughing and brushing of 
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard 
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for 
sanding with sanding discs.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.

1

Release lever for protection guard

2

Spindle lock button

3

Thumbwheel for speed preselection  
(GWS 15-125 CIEH/GWS 15-125 CITH)

4

On/Off switch

5

Auxiliary handle (insulated gripping surface)

6

Grinder spindle

7

Extraction hood for sanding *

8

Mounting flange with O-ring

9

Carbide grinding head *

10

Clamping nut

11

Quick-clamping nut 

*

12

Protection guard for grinding

13

Grinding wheel *

14

Protection guard for cutting *

15

Cutting disc *

16

Hand guard *

17

Rubber sanding plate *

18

Sanding sheet *

19

Round nut *

20

Cup brush *

21

Cutting guide with dust extraction protection guard *

22

Diamond cutting disc *

23

Handle (insulated gripping surface)

24

Direction-of-rotation arrow for grinding spindle

* Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories 
can be found in our accessories program.

Noise/Vibration Information

Sound emission values determined according to 
EN 60745-2-3.

Typically the A-weighted noise levels of the product are: 
Sound pressure level 91 dB(A); Sound power level 
102 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values a

h

 (triax vector sum) and uncertainty K 

determined according to EN 60745-2-3:
Surface grinding: a

h

= 9 m/s

2

, K = 1.5 m/s

2

,

Disk sanding: a

h

= 5 m/s

2

, K = 1.5 m/s

2

.

The vibration level given in this information sheet has been 
measured in accordance with a standardised test given in 
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different 
applications, with different accessories or insertion tools or is 
poorly maintained, the vibration emission may differ. This 
may significantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibration should also 
take into account the times when the tool is switched off or 
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working 
period.
Identify additional safety measures to protect the operator 
from the effects of vibration such as: maintain the tool and the 
accessories, keep the hands warm, organisation of work pat-
terns.

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under “Technical Data” is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until 
19 April 2016: 2004/108/EC, from 20 April 2016 on: 
2014/30/EU, 2006/42/EC including their amendments and 
complies with the following standards: 
EN 60745-1, EN 60745-2-3.

Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY

Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 16.02.2015

Henk Becker
Executive Vice President
Engineering

Helmut Heinzelmann
Head of Product Certification
PT/ETM9

OBJ_BUCH-165-007.book  Page 19  Thursday, February 12, 2015  10:55 AM