Bosch GWS 15 125 CI - Инструкция по эксплуатации - Страница 14

14

 | English 

1 609 929 Y28 | (8.9.11)

Bosch Power Tools

Additional Safety and Working 

Instructions

f

Observe the mains voltage! The voltage of the power 

source must correspond with the data on the type plate 

of the machine.

f

Use suitable detectors to determine if utility lines are 

hidden in the work area or call the local utility company 

for assistance. 

Contact with electric lines can lead to fire 

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage or 

may cause an electric shock.

f

Release the On/Off switch and set it to the off position 

when the power supply is interrupted, e. g., in case of a 

power failure or when the mains plug is pulled. 

This pre-

vents uncontrolled restarting.

f

Dusts from materials such as lead-containing coatings, 

some wood types, minerals and metal can be harmful to 

one’s health and cause allergic reactions, lead to respi-

ratory infections and/or cancer.

 Materials containing as-

bestos may only be worked by specialists.

– As far as possible, use a dust extraction system suita-

ble for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the 

materials to be worked.

f

Prevent dust accumulation at the workplace. 

Dusts can 

easily ignite.

f

Secure the workpiece. 

A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

f

After breakage of the grinding disc during operation or 

damage to the holding fixtures on the protection 

guard/power tool, the machine must promptly be sent to 

an after-sales service agent for maintenance (for address-

es, see section „After-sales Service and Customer 

Assistance“.

f

Adjust protection guard in such a manner that sparking 

toward the operator is prevented.

f

The protection guard may only be turned while actuat-

ing the release lever on the gear head. Otherwise, the 

machine may not continue to be used anymore and 

must be sent to an after-sales service agent.

f

Grinding and cutting discs become very hot while 

working; do not touch until they have cooled.

f

Actuate the spindle lock button only when the grinder 

spindle is at a standstill. 

Otherwise, the machine may be-

come damaged.

f

After mounting the grinding tool and before switching 

on, check that the grinding tool is correctly mounted 

and that it can turn freely. Make sure that the grinding 

tool does not graze against the protection guard or oth-

er parts.

f

When operating the machine with power from mobile gen-

erators, loss of performance or untypical behavior can oc-

cur upon switching on.

f

By applying too high application force, the machine can 

be subject to overload. Overload can lead to overheat-

ing and damage of the power tool. After heavily strain-

ing the power tool, continue to run it at no-load for sev-

eral minutes in order to cool it down.

f

Do not use the power tool with a cut-off stand.

f

Never use a cutting disc for roughing.

f

The quick-clamping nut may be used only for grinding 

or cutting discs. Use only a flawless, undamaged quick-

clamping nut.

f

Do not pull out the gear head while turning it  –  

see figure 12,  page 246.

Products sold in GB only

: Your product is fitted with an 

BS 1363/A approved electric plug with internal fuse (ASTA 

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be 

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should 

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible 

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only

: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Symbols

The following symbols are important for reading and under-

standing the operating instructions. Please take note of the 

symbols and their meaning. The correct interpretation of the 

symbols will help you to use the machine in a better and safer 

manner.

Symbol

Meaning

Article number

Read all safety warnings and all instruc-

tions

Before any work on the machine itself, 

pull the mains plug from the socket 

outlet

Wear protective gloves

Wear ear protection.

Wear safety glasses/goggles

OBJ_BUCH-1425-003.book  Page 14  Thursday, September 8, 2011  4:07 PM