Bosch GEX 125 AC - Инструкция по эксплуатации - Страница 18

18

 | English 

1 609 929 N98 | (13.11.08)

Bosch Power Tools

Noise/Vibration Information

Measured values determined according to 
EN 60745.
Typically the A-weighted sound pressure level of 
the product is 75 dB(A). Uncertainty K = 3 dB.
The noise level when working can exceed 
80 dB(A).

Wear hearing protection!

Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a

h

= 4.0 m/s

2

, Uncer-

tainty K = 1.5 m/s

2

.

The vibration emission level given in this infor-
mation sheet has been measured in accordance 
with a standardised test given in EN 60745 and 
may be used to compare one tool with another. 
It may be used for a preliminary assessment of 
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However 
if the tool is used for different applications, with 
different accessories or poorly maintained, the 
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total 
working period.
An estimation of the level of exposure to vibra-
tion should also take into account the times 
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the to-
tal working period.
Identify additional safety measures to protect 
the operator from the effects of vibration such 
as: maintain the tool and the accessories, keep 
the hands warm, organisation of work patterns. 

Declaration of Conformity

We declare under our sole responsibility that the 
product described under “Technical Data” is in 
conformity with the following standards or 
standardization documents: EN 60745 according 
to the provisions of the directives 2004/108/EC, 
98/37/EC (until 28 Dec 2009), 2006/42/EC 
(from 29 Dec 2009).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen

Robert Bosch GmbH, Power Tools Division

D-70745 Leinfelden-Echterdingen

23.09.2008

Assembly

f

Before any work on the machine itself, pull 
the mains plug.

Replacing the Sanding Sheet 

(see figure A)

When attaching a new sanding sheet, remove 
any dust or debris from the sanding plate 

8

, 

e. g., with a brush.
The surface of the sanding plate 

8

 is fitted with 

Velcro backing for quick and easy fastening of 
sanding sheets with Velcro adhesion.
Press the sanding sheet 

9

 firmly against the bot-

tom side of the sanding plate 

8

.

To ensure optimum dust extraction, pay atten-
tion that the punched holes in the sanding sheet 
match with the holes in the sanding plate.

Dr. Egbert Schneider
Senior Vice President
Engineering

Dr. Eckerhard Strötgen
Head of Product
Certification

OBJ_BUCH-424-002.book  Page 18  Thursday, November 13, 2008  9:49 AM