Bosch 0.601.387.500 - Инструкция по эксплуатации - Страница 13

English | 

13

2 609 140 411 • 11.6.07

General Power Tool Safety 
Warnings

Read all safety warnings and all
instructions. 

Failure to follow the

warnings and instructions may result in electric shock,
fire and/or serious injury.

Save all warnings and instructions for future
reference.

The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. 

Clut-

tered or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of
flammable liquids, gases or dust. 

Power

tools create sparks which may ignite the dust
or fumes.

c) Keep children and bystanders away while

operating a power tool. 

Distractions can

cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do not
use any adapter plugs with earthed
(grounded) power tools. 

Unmodified plugs

and matching outlets will reduce risk of electric
shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes, radia-
tors, ranges and refrigerators. 

There is an

increased risk of electric shock if your body is
earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. 

Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the
power tool. Keep cord away from heat, oil,
sharp edges and moving parts. 

Damaged

or entangled cords increase the risk of electric
shock.

e) When operating a power tool outdoors,

use an extension cord suitable for out-
door use. 

Use of a cord suitable for outdoor

use reduces the risk of electric shock.

f) If operating a power tool in a damp loca-

tion is unavoidable, use a residual current
device (RCD) protected supply. 

Use of an

RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and

use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. 

A moment of

inattention while operating power tools may
result in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. 

Protective

equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before
connecting to power source and/or bat-
tery pack, picking up or carrying the tool.

Carrying power tools with your finger on the
switch or energising power tools that have the
switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. 

A wrench

or a key left attached to a rotating part of the
power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. 

This enables better

control of the power tool in unexpected situa-
tions.

f) Dress properly. Do not wear loose cloth-

ing or jewellery. Keep your hair, clothing
and gloves away from moving parts. 

Loose

clothes, jewellery or long hair can be caught in
moving parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,
ensure these are connected and properly
used. 

Use of dust collection can reduce dust-

related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the cor-

rect power tool for your application. 

The

correct power tool will do the job better and
safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. 

Any power tool

that cannot be controlled with the switch is
dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or the battery pack from the
power tool before making any adjust-
ments, changing accessories, or storing
power tools. 

Such preventive safety meas-

ures reduce the risk of starting the power tool
accidentally.

WARNING

OBJ_BUCH-315-002.book  Page 13  Monday, June 11, 2007  12:59 PM