BORT BBS-801N - Инструкция по эксплуатации - Страница 7

7

GB

Belt sander

INTENDED USE

This tool is intended for dry sanding with high removal 
performance of wood, plastic, metal, etc.

TECHNICAL SPECIFICATIONS   

 1 

PRODUCT ELEMENTS   

 2 

1 On/off 

switch

2  Knob for locking on/off switch
3  Lever for changing sanding belt
4 Arrow
5  Knob for adjusting belt centering
6 Dustbag

SAFETY

WARNING! Read all instructions. Failure to follow all 
instructions listed below may result in electric shock, 

fi

 re and/or serious injury.

●

  Avoid damage that can be caused by screws, nails 

and other elements in your workpiece; remove them 
before you start working

●

  Always keep the cord away from moving parts of the 

tool; direct the cord to the rear away from the tool

●

  When you put away the tool, switch off the motor 

and ensure that all moving parts have come to a 
complete standstill

●

  Use completely unrolled and safe extension cords 

with a capacity of 16Amps (U.K. 13 Amps)

●

 In case of electrical or mechanical malfunction, 

immediately switch off the tool and disconnect the 
plug

●

  SBM GROUP can assure 

fl

 awless functioning of the 

tool only when original accessories are used

●

  This tool should not be used by people under the 

age of 16 years

●

  The noise level when working can exceed 85 dB(A); 

wear ear protection

●

  If the cord is damaged or cut through while working, 

do not touch the cord, but immediately disconnect 
the plug

●

  Never use tool when cord is damaged; have it re-

placed by a quali

fi

 ed person

●

  Always check that the supply voltage is the same as 

the voltage indicated on the nameplate of the tool 
(tools with a rating of 230V or 240V can also be con-
nected to a 220V supply)

●

  This tool is not suitable for wet sanding

●

  Do not work materials containing asbestos (asbes-

tos is considered carcinogenic)

●

  Take protective measures when during work dust 

can develop that is harmful to one’s health, combus-
tible or explosive (some dusts are considered carci-
nogenic); wear a dust mask and work with dust/chip 
extraction when connectable

●

  When sanding metal, sparks are generated; do not 

use dustbox/dustbag/vacuum cleaner and keep other 
persons and combustible material from work area

●

  Do not touch the running sanding belt

●

  Do not continue to use worn, torn or heavily clogged 

sanding belts

●

  Wear protective gloves, safety glasses, close-

fi

 tting 

clothes and hair protection (for long hair)

●

  Always disconnect plug from power source before 

making any adjustment or changing any accessory

WHEN CONNECTING NEW 3-PIN PLUG (U.K. ON-

LY):

●

  Do not connect the blue (= neutral) or brown (= live) 

wire in the cord of this tool to the earth terminal of 
the plug

●

  If for any reason the old plug is cut off the cord of 

this tool, it must be disposed of safely and not left 
unattended

●

  before the sanding surface reaches the workpiece, 

you should switch on the tool

●

  before switching off the tool, you should lift it from 

the workpiece

Your machine is double insulated in accord-
ance with EN 50144; therefore no earthwire is 
required.

MAINTENANCE

Make sure that the machine is not live when 
carrying out maintenance work on the motor. 

Regularly clean the machine housing with a soft cloth, 
preferably after each use. Keep the ventilation slots 
free from dust and dirt.If the dirt does not come off use 
a soft cloth moistened with soapy water. Never use 
solvents such as petrol, alcohol, ammonia water, etc. 
These solvents may damage the plastic parts.
The machine requires no additional lubrication.
Should a fault occur, e.g. after wear of a part, please 
contact your local SBM Group dealer.

ENVIRONMENT

In order to prevent the machine from damage during 
transport, it is delivered in a sturdy packaging. Most of 
the packaging materials can be recycled. Take these 
materials to the appropriate recycling locations. Take 
your unwanted machines to your local SBM Group 
dealer. Here they will be disposed of in an environmen-
tally safe way.

English