QNAP HS-264-8G (2.5GbE, HDMI, Gen2) - Инструкция по эксплуатации - Страница 34

Сетевые хранилища QNAP HS-264-8G (2.5GbE, HDMI, Gen2) - инструкция пользователя по применению, эксплуатации и установке на русском языке. Мы надеемся, она поможет вам решить возникшие у вас вопросы при эксплуатации техники.

Если остались вопросы, задайте их в комментариях после инструкции.

"Загружаем инструкцию", означает, что нужно подождать пока файл загрузится и можно будет его читать онлайн. Некоторые инструкции очень большие и время их появления зависит от вашей скорости интернета.
Страница:
/ 47
Загружаем инструкцию
background image

6. Troubleshooting

This chapter describes basic troubleshooting information.

Forcing Qfinder Pro or myQNAPcloud to Locate the NAS

If Qfinder Pro or myQNAPcloud is unable to locate the NAS during QTS installation, the drives or data may

be faulty.

1. Power off the NAS.

2. Remove all drives.

3. Power on the NAS.

4. Locate the NAS using Qfinder Pro or myQNAPcloud.

5. Reinsert the drives.

6. Continue with the QTS installation.

Hot-swapping Failed Drives

The NAS supports hot-swapping of drives in the following situations:

RAID Type

Situation

RAID 1

One member drive fails.

1. Log on to QTS.

2. Go to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD .

3. Locate the failed drive.

4. Prepare a new hard drive with a capacity that is the same as or larger than the failed hard drive.

5. Remove the failed drive from the device.

6. Wait for 20 seconds or until the device beeps twice.

7. Remove the failed drive from the drive tray.

8. Insert the new drive into the drive tray.

9. Install the new drive. 

The NAS beeps twice.

10. Go to Main Menu > Storage & Snapshots > Storage > Storage/Snapshots .

11. Locate the volume that contains the new drive and then verify that the status is 

Rebuilding

.

Recovering Unintentionally Removed Hard Drives

The NAS supports exclusive RAID recovery technology to recover failed RAID disk volumes from

unintentional disconnection or removal of drives. Users can recover an inactive RAID 1, RAID 5, RAID 6,

RAID 10, RAID 50, or RAID 60 volume from degraded mode.

HS-264 User Guide

Troubleshooting   

33

Характеристики

Оцените статью
tehnopanorama.ru
Остались вопросы?

Не нашли свой ответ в руководстве или возникли другие проблемы? Задайте свой вопрос в форме ниже с подробным описанием вашей ситуации, чтобы другие люди и специалисты смогли дать на него ответ. Если вы знаете как решить проблему другого человека, пожалуйста, подскажите ему :)

Задать вопрос

Часто задаваемые вопросы
Как посмотреть инструкцию к QNAP HS-264-8G (2.5GbE, HDMI, Gen2)?
Необходимо подождать полной загрузки инструкции в сером окне на данной странице
Руководство на русском языке?
Все наши руководства представлены на русском языке или схематично, поэтому вы без труда сможете разобраться с вашей моделью
Как скопировать текст из PDF?
Чтобы скопировать текст со страницы инструкции воспользуйтесь вкладкой "HTML"