Tefal Cake Factory KD802112 - Инструкция по эксплуатации - Страница 42

Troubleshooting Guide

Problem

Solution

Er00 or Er003

Appliance failure:
Unplug the appliance and contact your customer service 
or a repair centre.

Er01/Er02/Er04/Er05/Er06 

Unplug the appliance and wait a few minutes.
Then plug in your appliance again and turn it on.
If the problem persists, contact your customer service or a 
repair centre.

The displayed time flashes

If the displayed time is correct, press OK to confirm.

The displayed temperature flashes

If the displayed temperature is correct, press OK to 
confirm.

The illuminated program flashes

If the displayed program is correct, press OK to confirm.

The appliance does not close properly

Open the appliance, check that the support grid has not 
been left under the non-stick cooking mould.
Check whether you are using a silicone mould taller than 
4.5 cm. If this is the case: remove the support grating.
The mould used is not suitable for this appliance: use a 
mould that conforms with this appliance's conditions for 
use.

The time has reached 000, but the level of 
cooking is insufficient

At the end of cooking, after having turned off the beep 
sound by pressing OK once, close the appliance again and 
add some time using the – and + buttons, then confirm by 
pressing OK.

During cooking, after a modification to the 
cooking time, the cooking time automatically 
returns to the initial time

After having modified the time, press OK to confirm.

After a cooking program has been launched, 
it is not possible to modify the cooking time

Wait for 2 minutes to elapse after the launch of the 
program to modify the time using the – and + buttons.

42