Vitek VT-8293 - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

–  The unit is intended for operation from an AC power 

network with the frequency of 50 or 60  Hz. The unit 

does not need any additional settings for operating 

with the required rated frequency.

USAGE

To get the best results, wash your hair with shampoo, 

wipe it with a dry towel, dry with a hairdryer and comb 

your hair. After that you can start styling your hair.

–  Divide the hair into locks 4-5 cm wide.

–  Put the unit on the safety stand (3) on a flat heat-

resistant surface.

–  Insert the plug into the mains socket.

–  Switch the unit on by setting the power switch (6) to 

the position «ON», the light indicator (5) will light up.

–  Wait for some time required for the operation sur-

face (2)  heating. 

–  Take a hair lock with the free hand.

–  Press the clamp handle (4), place the end of the 

lock on the operating surface (2) and move the 

clamp (4) down. Holding onto the protecting tip (1) 

and handle (7), wind the lock around the operating 

surface (2).

–  Wait for a while, then press the clamp handle (4) and 

release the hair lock.

–  Repeat this procedure on the rest of your hair.

Notes:

–  when using the unit for the first time, a foreign smell 

can appear. It is normal.

–  do not touch the operating surface (2) during the 

unit operation, hold the unit by the protecting tip (1) 

with one hand and by the handle with the other (7).

–  during breaks in operation, place the unit on the 

safety stand (3) on a flat heat-resistant surface.

–  do not comb the hair right after curling it, let it cool 

down, divide big locks into smaller ones carefully to 

make the hairstyle look natural.

–  After the unit operation, switch the unit off by set-

ting the power switch (6) to the “OFF” position and 

unplug it.

IM VT-8293_70x130.indd   6

08.02.2019   17:01:21