Vitek VT-8292 - Инструкция по эксплуатации - Страница 6

6

 ENGLISH

–  Insert the plug into the mains socket.

–  Switch the unit on by setting the power switch (6) to the 

position «I», the light indicator (5) will light up.

–  Wait for some time required for the operation surface (2) 

heating. 

–  Take a hair lock with the free hand.

–  Press the clamp handle (4), place the end of the lock on 

the operating surface (2) and move the clamp (4) down. 

Holding onto the protecting tip (1) and handle (7), wind 

the lock around the operating surface (2).

–  Wait for a while, then press the clamp handle (4) and 

release the hair lock.

–  Repeat this procedure on the rest of your hair.

Notes:

–  when using the unit for the first time, a foreign smell can 

appear. It is normal.

–  do not touch the operating surface (2) during the unit 

operation, hold the unit by the protecting tip (1) with one 

hand and by the handle with the other (7).

–  during breaks in operation, place the unit on the safety 

stand (3) on a flat heat-resistant surface.

–  do not comb the hair right after curling it, let it cool 

down, divide big locks into smaller ones carefully to 

make the hairstyle look natural.

–  After the unit operation, switch the unit off by setting the 

power switch (6) to the “0” position and unplug it.

–  Put the unit on the safety stand (3) on a flat heat-resis-

tant surface and let it cool down completely.

CLEANING AND CARE

–  Before cleaning unplug the unit and let it cool down 

completely.

–  Do not immerse the unit, power cord and power plug of 

the unit into water or any other liquids.

–  Do not use detergents, abrasives or any solvents to 

clean the unit.

–  Clean the unit body with a soft, slightly damp cloth and 

then wipe it dry.

STORAGE

–  Let the unit cool down completely and clean it before 

taking away for storage.

IM VT-8292_70x130.indd   6

03.10.2018   13:57:39